Multisurface Mount Kit for TSW-1060, TSW-1060-NC, and TSS-10, Flat, Black
Allows a TSW‑1060, TSW‑1060‑NC, or TSS‑10 touch screen to be flush mounted to a glass wall or other smooth, flat surface. Ideal for mounting at the entrance to a meeting space for room scheduling applications.
The TS‑10‑MSMK multisurface mount kit provides a versatile surface mounting solution for a TSW‑1060, TSW‑1060‑NC, or TSS‑10 touch screen. Using the multisurface mount kit, the touch screen can be mounted directly to glass, granite, marble, wood paneling, plaster, smooth masonry, or virtually any other flat surface. The TS‑10‑MSMK is ideal for mounting at the entrance to a meeting space for room scheduling applications, and it is compatible with the TSW‑1060‑LB light bar to provide a clear indication of the room availability status.
The TS‑10‑MSMK attaches securely to a flat, smooth surface without screws using the included peel‑and‑stick adhesive rear housing. For a finished appearance when mounted to a transparent glass wall, an adhesive molded plastic cap is provided, which simply affixes to the opposite side of the glass behind the unit. Templates are provided for the MSMK and the plastic cap to help ensure that both are level and properly aligned with the surface.
The TS‑10‑MSMK comes complete with a self‑adhering plastic raceway for use on smooth surfaces, which conceals cables running to the touch screen from the floor, ceiling, or an adjacent wall, pillar, or mullion. The raceway is paintable and is composed of three 3 foot (0.91 m) sections, as well as an assortment of elbows and couplings.
The TS‑10‑MSMK rear housing provides four cutout holes (on the top, bottom, and sides of the housing) for running concealed cables to the touch screen using the included adhesive‑backed raceway. A plastic cover with an opening for the raceway is attached to the rear housing to conceal any unused cutouts.
- Enables flush mounting a TSW‑1060, TSW‑1060‑NC, or TSS‑10 touch screen to virtually any flat, smooth surface
- Ideal for mounting at the entrance to a meeting space for room scheduling applications
- Compatible with TSW‑1060‑LB light bar for clear indication of the room availability status
- Secure, screwless installation using peel‑and‑stick adhesive rear housing
- Perfect for mounting to a glass wall or partition
- Includes an assortment of raceway to conceal wiring
- Includes a rotatable plastic cover that attaches to rear housing to conceal unused cutouts
- Available in black or white finish
||Plastic, black or white finish
||Peel-and-stick adhesive mounting to glass or other flat, smooth surface
||Peel-and-stick adhesive mount plastic raceway, white (paintable), 0.77 inch W x 0.46 inch D (19.6 mm W x 11.7 mm D) profile; includes (3) 3 ft (0.91 m) straight sections, (2) straight couplers, (2) 90° flat elbows, (1) inside elbow, and (1) outside elbow
|Without touch screen
||Height: 5.55 in. (141 mm)
Width: 9.19 in. (233 mm)
Depth: 1.67 in. (42 mm)
|With touch screen installed
||Height: 6.58 in. (167 mm)
Width: 10.22 in. (260 mm)
Depth: 2.13 in. (54 mm)
|With touch screen and light bar installed
||Height: 6.59 in. (167 mm)
Width: 10.95 in. (278 mm)
Depth: 2.25 in. (57 mm)
|5.3 oz (150 g) without touch screen, light bar, or raceway