The CL‑SPACEBUILDER‑GLEP‑MLO SpaceBuilder® system is an MLO cabinet with space for up to 42 zones. CL‑SPACEBUILDER‑GLEP‑MLO is great for spaces that do not have accessible ceilings such as auditoriums, warehouses, sports venues, and large parking structures. The CL‑SPACEBUILDER‑GLEP‑MLO is a quickly configured and shipped main-lug only panel solution that supports very large spaces.
Configure and order the CL‑SPACEBUILDER‑CAEN‑MLO SpaceBuilder® system at
www.crestron.com/spacebuilder.
Module Options:
Dimming Modules
2‑Wire Forward Phase Dimming
Deploy 16 A, 2-wire forward phase dimmed loads using the GLXX‑2DIM8. The GLXX-2DIM8 accepts two 20 A inputs that support eight 16 A lighting zones. This module accepts 100–277 VAC power and has a maximum rating of 32 A. Each input can be from a different phase.
4‑Wire 0–10 V Dimming
Deploy 16 A, 0–10 V dimmed loads, or 4-wire switched loads, using the GLXP-DIMFLV8-LP. The GLXP-DIMFLV8-LP accepts eight 20 A inputs that support eight 16 A lighting zones. This module accepts 120–277 VAC power.
Switching Modules
16‑Channel Switching (100,000 Cycle)
Deploy 16 A, 2-wire, 100,000 cycle switched loads using the GLXP-SW16-LP. The GLXP-SW16-LP accepts sixteen 20 A inputs that support sixteen 16 A lighting zones. This module accepts 100–277 VAC power.
12‑Channel Switching (1,000,000 Cycle)
Deploy 16 A, 2-wire, 1,000,000 cycle switched loads using the GLXP‑SW12‑LP. The GLXP‑SW12‑LP accepts twelve 20 A inputs that support twelve 16 A lighting zones. This module accepts 100–277 VAC power.
Processor Module
The processor module consists of a DIN‑AP4 and a DIN‑PWS60 which are mounted to a DIN rail. The DIN-AP4 is a Crestron® 4-Series® Control engine that provides fast and powerful control of the lighting system. The DIN-AP4 controls connected modules and supports astronomical time-clock control, 40 Cresnet® control devices, and 50 BACnet™/IP points. The DIN‑PWS60 supplies power to the DIN‑AP4.
Ethernet Uplink Module
The Ethernet uplink module consists of a DIN-CENCN-2-POE and DIN‑PWS60 which are mounted to a DIN rail. The DIN-CENCN-2-POE is an Ethernet to Cresnet network bridge that provides scalability to CL‑SPACEBUILDER systems. The DIN‑CENCN‑2‑POE receives commands from a DIN-AP4 control system to provide control for the connected modules and to pass commands through to additional CL‑SPACEBUILDER systems. The DIN-PWS60 supplies power to the DIN‑CENCN‑2.
Options:
Assembly
CL‑SPACEBUILDER‑GLEP‑MLO systems are assembled in Crestron’s UL508 panel shop. The system can also be ordered as individual components that are shipped independently and require on-site assembly.
Voltage
The CL‑SPACEBUILDER‑GLEP‑MLO is available in 3‑phase 120 and 277 VAC options.
Networking
For easy scalability, CL‑SPACEBUILDER‑GLEP‑MLO systems can be configured to use Ethernet or Cresnet communication.