Products

    Pages

        GLXP-SW16-LP

        16-Channel Switch Module, Low Profile

        The Crestron® GLXP‑SW16‑LP is a Crestron Green Light® switching module which features 16 independent channels of power switching with mechanically‑latching relays. Each channel is rated to control a 16 A lighting load or 1 HP motor.

        The Crestron® GLXP‑SW16‑LP is a Crestron Green Light® switching module which features 16 independent channels of power switching with mechanically‑latching relays. Each channel is rated to control a 16 A lighting load or 1 HP motor.

        Override Input
        Send an override signal from the control system to set all output channels to their preset override level. Override mode can also be triggered from the front-panel of the GLXP‑SW16‑LP. Override levels can be adjusted and saved using the front-panel controls or via software.

        Cresnet® Communications
        The GLXP‑SW16‑LP communicates with a Crestron control system using the Cresnet control network. A pair of Cresnet ports are provided on the GLXP‑SW16‑LP to allow easy daisy‑chaining of several Crestron devices.

         
        Key Features
        • 16 channels of power switching
        • Mechanically‑latching relays
        • Positive air gap at each output
        • Supports 100–277 VAC applications
        • 16 A, 1 HP load rating per channel
        • Phase-independent channels
        • Cresnet® communications
        • Redundant power capability—module powered via line or Cresnet
        • Front-panel controls for testing and verification
        • Local and remote override capability
        • Low-profile design
        • Non-volatile power failure memory
        • Mounts in a GLEX Series lighting enclosure

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How‑To‑Buy/Find‑a‑Representative or by calling 855‑263‑8754.

        Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at www.crestron.com/about/partner‑info/commercial‑lighting‑consultants. For assistance with incorporating this product into a design or specification, please contact the Commercial Lighting Consultant Hotline via email at clcdesign@crestron.com or by calling 888-330-1502.

        The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Crestron Green Light, and.Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2019 Crestron Electronics, Inc.

         
        Power Requirements
        Primary 100–277 VAC, 50/60Hz, supplied via channel 1 (L1, N1)
        Secondary (optional) 5 W @ 24 VDC, supplied via Cresnet®
        Load Ratings
        Switch Channels 16
        Per Channel 16 A @ 100–277 VAC, 50/60 Hz;
        0.5 HP @ 120 VAC, 1 HP @ 230 VAC, 1 HP @ 277 VAC
        Switch Load Types Incandescent, Magnetic Low‑Voltage, Electronic Low‑Voltage, Neon/Cold Cathode, Fluorescent Ballast, High‑Intensity Discharge, LED, Motor
        Relay Lifetime Resistive rating: 100,000 on/off operations,
        50 A @ 277 VAC;
        General rating: 50,000 on/off operations, 16 A @ 120/277 VAC
        Connectors
        NET (2) 5-pin headers;
        Connect to adjacent module or internal connecting block using interconnect cable (block and cable provided)
        N1 (1) terminal block;
        Line input neutral;
        Accepts 14–10 AWG wire;
        Torque to 4.43 lb-in. (0.5 Nm)
        L1-L16 (16) terminal blocks;
        Line power inputs;
        Accepts 14–10 AWG wire;
        Torque to 4.43 lb-in. (0.5 Nm)
        SW1-SW16 (16) terminal blocks;
        Switch channel outputs;
        Accepts 14–10 AWG wire;
        Torque to 4.43 lb-in. (0.5 Nm)
        Controls and Indicators
        NET ID (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID
        SETUP (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch‑settable ID (TSID)
        OVR (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets
        PWR (1) Green LED; solid illumination indicates line power is applied to N1 and L1;
        Flashing indicates Cresnet power is supplied in absence of line power
        NET (1) Yellow LED; indicates communication with control processor
        RESET (1) Recessed miniature pushbutton, resets internal processor
        ON/OFF (16) Red LEDs and (16) miniature pushbuttons for individual manual channel activation
        Environmental
        Temperature 32° to 104°F (0° to 40°C)
        Humidity 10% to 90% RH (noncondensing)
        Humidity 136 Btu/h
        Construction
        Mounts in a GLEX series enclosure using integral mounting flanges
        Dimensions
        Height 11.07 in. (281 mm)
        Width 9.5 in. (241 mm) including mounting flanges
        Depth 3.07 in. (78 mm) including standoffs
        Weight
        7.0 lb (112 oz)
        Compliance
        UL®508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts);
        UL924, Emergency Power Equipment;
        IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or other capacitive loads);
        SCCR Rating - 18kA;
        CE

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How‑To‑Buy/Find‑a‑Representative or by calling 855‑263‑8754.

        Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at www.crestron.com/about/partner‑info/commercial‑lighting‑consultants. For assistance with incorporating this product into a design or specification, please contact the Commercial Lighting Consultant Hotline via email at clcdesign@crestron.com or by calling 888-330-1502.

        The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Crestron Green Light, and.Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2019 Crestron Electronics, Inc.