Products

    Pages

        CLWI-KPLCN-W

        In-Wall Keypad, Cresnet, White

        The CLWI-KPLCN is a companion keypad for CLWI dimmers and switches; they share the exact same aesthetics. The CLWI-KPLCN uses Cresnet® for power and communication and is suited for installation in any space. 


        Faceplates for keypads sold separately.

        The CLWI-KPLCN is a companion keypad for CLWI dimmers and switches; they share the exact same aesthetics. It provides lighting and audio control from more than one location around the home or office. Its customizable button layout can be set to recall scenes, dim up and down, and adjust volume. The CLWI-KPLCN uses Cresnet® for power and communication and is suited for installation in any space.

        Field-Replaceable and Engravable Buttons
        The CLWI-KPLCN features engravable buttons that can be swapped out in the field. Change of room décor or functionality is easy to handle long after the keypad has been installed. Positive snap-on fittings require no tools for installation. Configure the keypad with a large rocker switch or any combination of up to two adjacent half-size rocker switches or triple-button pads. Each CLWI-KPLCN comes with a full assortment of blank buttons as well.

        Multi-Function Keypad
        The CLWI-KPLCN is connected to the Crestron® control system, enabling it to perform any function that is desired. While it provides multi-way lighting control, it can also be configured to adjust audio volume and shades—and even call global presets such as "goodnight."

        Cresnet
        The CLWI-KPLCN uses the dependable Cresnet wired network for communication between devices. Cresnet provides a simple solution for configuring and wiring keypads and sensors as part of any complete Crestron system. Cresnet is the communications backbone for Crestron lighting dimmers, keypads, shades, thermostats, and many other devices. This flexible 4-wire bus provides data communications and 24 Volts DC power for all of the devices on the Cresnet network. The CLWI-KPLCN also provides dual Versiports for connecting photocells, occupancy sensors, or other similar devices.

         
        Key Features
        • Versatile, in-wall keypad for control of lighting and audio
        • Cresnet® power and communications
        • Field-replaceable, engravable buttons
        • Customizable button layout
        • Available in white and anthracite finishes

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource

        Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.

         
        Connectors
          NET (1) 4-pin 3.5 mm detachable terminal block;
        Cresnet® slave port, connects to Cresnet control network
        Buttons
          Configurable for (1) rocker (up/down) switch or any combination of up to (2) small rockers and (2) three-button strips;
        Maximum layout contains (6) buttons;
        Each button press is configurable for up to three discrete functions via single tap, double tap, and press and hold;
        Button events are programmable via the control system
        Power Requirements
          Cresnet Power Usage 0.5 Watts (0.02 Amps at 24 Volts DC)
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          Mountable in a 1-gang UK (BS 4662) electrical box or 1-gang European (DIN 49073) electrical box;
        Requires a FP-INTENSE or FP-PURE style faceplate (both sold separately)
        Dimensions
          Height 2.80 in (72 mm)
          Width 2.80 in (72 mm)
          Depth 1.24 in (32 mm) including front face w/ buttons

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource

        Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.