Products

    Pages

        MP-B10-B-T

        Media Presentation Button Panel B10, Black

        A 3-gang, 10-button wall mount control panel with customizable backlit labeling, LED feedback, and volume control knob. Single-wire interface via PoE Ethernet or Cresnet®.

        The MP-B10 is an enhanced pushbutton control panel designed for installation in a wall or podium. It can be used with any Crestron® control system or presentation switcher, and it provides a perfect complement to any Crestron MPC Media Presentation Controller. Available in white or black, the MP-B10 is constructed to handle the rigors of everyday use in a typical classroom, meeting room, lecture hall, or training facility.

        Its 10 “hard key” buttons can be custom programmed to control any function, such as system power, input source selection, and lighting presets. Audio volume and other parameters are adjustable using the control knob and LED bargraph. Custom backlit labeling of each button is facilitated using an assortment of pre-printed labels or Crestron Engraver software.

        A built-in IR receiver provides a gateway for RC-5 and Crestron compatible IR wireless remotes. An ambient light sensor is also included, which may be programmed to control the MP-B10’s backlight intensity and other customer functions. The MP-B10 can be powered through the network wiring using either Cresnet® or PoE (Power over Ethernet), requiring just one wire for operation.

         
        Key Features
        • Wall mount pushbutton control panel
        • No programming required with select .AV Framework™ enabled switchers
        • 10 programmable buttons with LED feedback
        • Customizable backlit button labels
        • Volume control knob and LED bargraph
        • Built-in IR receiver and light sensor
        • High-speed Ethernet or Cresnet® communications
        • PoE or Cresnet network powered
        • 3-gang wall box-mountable

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, the Crestron logo, .AV Framework, and Cresnet, are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

         
        AVF Works With
        Communications
          Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, IEEE 802.3af and 802.3at Type 1 compliant
          Cresnet® Cresnet slave mode
          USB USB 1.1 device port for computer console (firmware update)
          IR Built-in RC-5 compatible IR receiver
        Connectors
          NET (2) sets of (4) captive screw terminals;
        Cresnet slave port with parallel pass-through
          LAN PoE (1) 8-wire RJ45, female;
        10Base-T/100Base-TX Ethernet port, Power over Ethernet compliant
          Computer (1) USB Type B, female (behind front cover);
        USB 1.1 computer console port for firmware update
          Ground (1) flying lead, chassis ground wire
        Controls & Indicators
          Hard Keys (10) Programmable pushbuttons with backlit labeling
          Feedback Indicators (10) Programmable red LEDs (1 per hard key)
          VOLUME (1) Programmable continuous turn rotary encoder
          Bargraph (1) Programmable red 5-segment LED bargraph
          HW-R (1) Recessed miniature pushbutton for hardware reset
          SETUP (1) Recessed miniature pushbutton (behind front cover) for setting up connection with the control system via Cresnet or Ethernet
          LAN PoE (rear) (2) green LEDs, bottom LED indicates link status, top LED indicates Ethernet activity
        Light Sensor
          Photosensor, programmable for auto-dimming of the backlight and other functions
        IR Receiver
          Reception Frequency 36 to 38 kHz IR
          Formats Crestron format, RC-5
          Range Up to 50 ft line of sight (typical), dependent upon angle, obstructions, IR interference, and IR remote signal strength
        Power Requirements
          Cresnet Power Usage 4 Watts (0.17 Amps @ 24 Volts DC)
          Power over Ethernet IEEE 802.3at Type 1 (802.3af compatible) Class 2 (6.49W) PoE Powered Device
          Note: If both PoE and Cresnet power are connected, power will be drawn from Cresnet.
        Environmental
          Temperature 32° to 104°F (0° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 14 BTU/hr
        Enclosure
          Faceplate Plastic, black or white, with polycarbonate label overlay
          Chassis Plastic with metal mounting plate
          Mounting Mounts in a 3-gang electrical box or mud ring, 2 inch (51 mm) or greater mounting depth recommended
        Dimensions
          Height 4.50 in (115 mm)
          Width 6.70 in (171 mm)
          Depth 2.23 in (57 mm)
        Weight
          17 oz (475 g)

         

        Ships with these standard button labels

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, the Crestron logo, .AV Framework, and Cresnet, are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.