Products

    Pages

        GLXX-CTRL

        Cresnet® Control Module

        • Green Light Express® control module
        • Controls up to 56 loads
        • Cresnet® communications

        The GLXX-CTRL is a Crestron® Green Light Express® control module which controls GLXX-SW8, GLXX-SW16, GLXX-HDSW8, and GLXX-HDSW16 relay modules. The module is part of a complete Crestron engineered GLPX Green Light Express panel.

        For more information on Crestron Green Light commercial lighting products, please contact Crestron Sales Support Services.

         
        Key Features
        • Controls up to 56 loads
        • Cresnet® communications
        • Local controls for testing and verification
        • Local and remote override capability
        • Non-volatile power failure memory
         
        Connectors
          NET (2) 4-pin 3.5mm detachable terminal blocks; Cresnet® port
          Communication (1) 16 pin IDC header, connects to adjacent GLXX module; provides power and control to attached modules
          OVR (2) 2-pin 3.5mm detachable terminal blocks, paralleled, comprising (2) inputs for external contact closures to engage override mode
        Controls & Indicators
          PWR (1) Green LED; indicates Cresnet power is applied to NET port
          NET (1) Yellow LED; indicates communication with control processor
          RESET (1) Recessed miniature pushbutton, resets internal processor
          NET ID (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID; also used to identify relay when in Local Control mode
          SETUP (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID
          OVR (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets
          Local Control Section
          ENABLE (1) Red LED and (1) miniature pushbutton for activating local mode
          UP/DN (2) miniature pushbuttons for selecting relay channel
          ON/OFF (2) miniature pushbuttons for manual channel activation
        Power Requirements
          5 Watts at 24 Volts DC (powered via control system)
        Environmental
          Temperature 32° to 104°F (0° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 1 BTU/Hr
        Dimensions
          Height 3.9 in (99 mm)
          Width 7.87 in (200 mm) including mounting holes
          Depth 1.23 in (31 mm)