Products

    Pages

        GLX-HSW8

        8 Channel High-Inrush Switch Module

        • 8 channels of high-inrush power switching
        • Compatible with lighting and motor loads
        • Supports 100 to 277 Volt applications

        Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

        The GLX-HSW8 High-Inrush Switch Module for Crestron Green Light® Architectural Dimming Cabinets features eight channels of high-inrush switching. The module is part of a complete Crestron engineered GLPD Green Light dimming panel.

        For more information on Crestron Green Light commercial lighting products, please contact Crestron Sales Support Services.

         
        Key Features
        • 8 channels of high-inrush switching
        • Compatible with lighting and motor loads
        • Supports 100 to 277 Volt applications
        • 16 Amp load rating per channel
        • Arc-less switching
        • Positive air gap at each output
        • Phase-independent channels
        • Cresnet® communications
        • Redundant power capability—module powered via line or Cresnet
        • Local controls for testing and verification
        • Local and remote override capability
        • Non-volatile power failure memory
        • GLE cabinet installation
        1. Line power terminal blocks accept 10-26 AWG wire; torque to 5.31 lb-in (0.6 Nm).

        Crestron products may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource

        Crestron, the Crestron Logo, Crestron Green Light, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice.  ©2015 Crestron Electronics, Inc.

         
        Load Ratings
          Dimmer Channels 8
          Per Channel 16 Amps at 100 to 277 Volts AC, 50/60 Hz;
        0.5 HP at 120 Volts, 1 HP at 230 Volts, 1 HP at 277 Volts
          Switch Load Types Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent ballast, high-intensity discharge, motor, LED driver
          Relay Lifetime 1,000,000 on/off operations at full electronic ballast load
        Power Requirements
          Primary 100-277 Volts AC, 50/60Hz, supplied via channel 1 (L1, N1)
          Secondary (Optional) 5 Watts at 24 Volts DC, supplied via Cresnet®
        Connectors
          NET (2) 5-pin headers;
        Connect to adjacent module or internal connecting block using interconnect cable (block and cable provided)
          N (1) Terminal block, line input neutral
          L1-L8 (8) Terminal blocks, line power inputs[1]
          SW1-SW8 (8) Terminal blocks, switch channel outputs
        Controls & Indicators
          NET ID (2) 7-segment green LED digits and (2) miniature pushbuttons, set Cresnet ID
          SETUP (1) Red LED and (1) recessed miniature pushbutton, enables Setup mode and sets touch-settable ID
          OVR (1) Red LED and (1) miniature pushbutton, enables override mode and saves override presets
          PWR (1) Green LED, indicates power status;
        Solid illumination indicates line power is applied to N and L1;
        Flashing indicates Cresnet power is supplied in absence of line power
          NET (1) Yellow LED, indicates communication with control processor
          RESET (1) Recessed miniature pushbutton, resets internal processor
          ON/OFF (1) Red LED and (2) miniature pushbuttons per each channel, manually activate channels
        Enclosure
          Surface mount module;
        Mounts in a GLE enclosure
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 112 BTU/Hr
        Dimensions
          Height 14.50 in (368 mm)
          Width 6.00 in (152 mm)
          Depth 3.22 in (82 mm)
        Weight
          5.0 lbs (2.27 kg)
        Electrical Regulatory Certifications
          UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
          UL924, Emergency Power Equipment
          IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or other capacitive loads)
          SCCR Rating - 65kA
          CE
        1. Line power terminal blocks accept 10-26 AWG wire; torque to 5.31 lb-in (0.6 Nm).

        Crestron products may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource

        Crestron, the Crestron Logo, Crestron Green Light, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice.  ©2015 Crestron Electronics, Inc.