Products

    Pages

        CSA-PWS10S-HUB

        10-Motor Power Supply and Cresnet® Hub

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        For a replacement, please see
        CSA-PWS10S-HUB-ENET.

         

        Powers up to 10 Crestron® Quiet Motor Technology™ roller shade or drapery system motors and features a built-in, 5-segment Cresnet® hub with network diagnostics capabilities.

        The CSA-PWS10S-HUB Power Supply powers up to 10 Crestron® Quiet Motor Technology™ roller shade or drapery system motors and features a built-in, 5-segment Cresnet® hub with network diagnostics capabilities. A local control interface with LED feedback indicators allows roller shade or drapery systems to be tested without a control system connection. The CSA-PWS10S-HUB is convection cooled for silent operation and can be surface mounted. Crestron offers model CSA-PWS10S-HUB-CAEN-1X1 as part of a pre-assembled CAEN-1X1 enclosure, which can be surface mounted or recessed in a wall. 

        Quick Troubleshooting

        The built-in diagnostics featured on the CSA-PWS10S-HUB enable the user to automatically shut down any branch with a fault, identify the exact problem (e.g., Y shorted to Z, Z shorted to GND, fuse blown) without a multi-meter, and trigger program events based on problems detected by the power supply (e.g., notices on touch screens and emails to the service department).

         
        Key Features
        • Support for up to 10 Crestron® roller shade motors, 10 drapery system motors, or a combination of the two up to a total of 10
        • Built-in 5-segment Cresnet® hub
        • Individual per-motor fuse protection
        • Local shade and drapery master controls
        • Clear diagnostic LED indicators
        • Convection cooled for silent operation
        • Available pre-assembled in CAEN-1X1 enclosure 

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource

        Crestron, the Crestron logo, Cresnet, and Quiet Motor Technology are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

         
        Load Rating
          Total Motors Supported Provides power for up to (10) Crestron® roller shade motors, (10) drapery system motors, or a combination of the two up to a total of (10) motors with each motor homerun to the power supply;
        10 Drapery System solutions carry 145 lbs load each
          Output 24 Volts DC 50 Watt Output
        350 Watts Total Continuous Load
        425 Watts 2 minutes ON, 2 minutes OFF Discontinuous Shade Load
          Load Protection (10) Self-resetting thermal fuses and (10) replaceable 4 Amp time lag fuses, (1) of each per output
        Power Requirements
          Line Power 120-240 Volts AC, 50/60 Hz, 5 Amps max
        Connections
          NET HOST IN, OUT (2) 4-pin 5 mm detachable terminal blocks;
        Cresnet slave ports, paralleled;
        Connect to Cresnet® control network, power not supplied to these connections;
        Cresnet power output ports with data pass-through
          A-E, 1-10 (10) 4-pin 5 mm detachable terminal blocks comprising (2) Cresnet ports per each of (5) hub segments
          USB (1) USB Type B female, USB computer console port
          Line Power (CSA-PWS10S-HUB) (1) Attached input power cable (~10 in long, 254 mm) with inline IEC 60320 C14 main power inlet;
        Mates with removable power cord (included)
          Line Power (CSA-PWS10S-HUB-CAEN-1X1) (1) Attached input power cable (~10 in long, 254 mm) with inline IEC 60320 C14 main power inlet;
        Connects to AC power source using grounded pigtail cable and terminal block (both included)
        LED Indicators
          PWR 1-10 (10) Green LEDs, indicate 24 Volts present at each corresponding output
          NET A-E (5) Amber LEDs, indicate Cresnet activity on each corresponding hub segment
          NET HOST (1) Amber LED, indicates Cresnet activity with control system
          MSG (1) Red LED, indicates error messages and Test mode
        Enclosure
          MASTER UP (1) Pushbutton, press and hold to raise all connected shades
          MASTER DOWN (1) Pushbutton, press and hold to lower all connected shades
          TEST (1) Pushbutton, initiates diagnostic test
          RESET (1) Recessed pushbutton, forces hardware reset
        Enclosure
          CSA-PWS10S-HUB Metal, grey, surface mount (indoor use only)
          CSA-PWS10S-HUB-CAEN-1X1 Includes CAEN-1X1, 16-gauge galvanized steel enclosure with vented grey steel cover;
        Surface mount or recess mount in a wall (indoor use only)
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 10% to 90% RH (non-condensing)
        Dimensions
          CSA-PWS10S-HUB
          Height 7.60 in (194 mm)
          Width 12.97 in (330 mm)
          Depth 2.66 in (68 mm)
          CSA-PWS10S-HUB-CAEN-1X1
          Height 16.57 in (421 mm)
          Width 16.10 in (409 mm)
          Depth 4.44 in (113 mm)
        Weight
          CSA-PWS10S-HUB 5.6 lbs (2.54 kg)
          CSA-PWS10S-HUB-CAEN-1X1 15 lbs (6.8 kg)
        Standards & Certifications
          UL Listed

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource

        Crestron, the Crestron logo, Cresnet, and Quiet Motor Technology are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.