Products

    Pages

        CSC-DCCN

        Cresnet® Interface to Crestron® CSM-QMT30 Shades

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        The CSC-DCCN is an interface designed to control one Crestron CSM-QMT30 shade motor and provide two-way communication between the motor and control system over Cresnet®.

        The CSC-DCCN is an interface designed to control one Crestron CSM-QMT30 shade motor and provide two-way communication between the motor and control system over Cresnet®. The CSC-DCCN features local buttons that allow for setting up limits and testing of the shades without use of the control system. In addition to controlling the shade motor, the CSC-DCCN provides 24 V power to a CSM-QMT30 motor. The CSC-DCCN can be surface mounted or mounted in a single-gang electrical box using a CSC-BRKT-1G mounting bracket (sold separately).

         

         

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative in your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2014 Crestron Electronics, Inc.

         
        Power Requirements
          Power Pack Use a Crestron® CSA-PWS40 Power Pack (sold separately; see in Available Accessories)
        Connections
          G 24/PWR G 24 (1) 2-pin 3.5mm detachable terminable block, power input from power supply
          G 24 + G - (1) 5-pin 3.5mm detachable terminable block, power and control to roller shade
          NET (2) 4-pin 3.5mm detachable terminal blocks; Cresnet® slave port and power input
        Controls & Indicators
          UP (1) Pushbutton, used to raise shade
          SET (1) Pushbutton, used to enter setup mode
          DN (1) Pushbutton, used to lower shade
          SET (1) Red LED, indicates the device setup status and error messages
          NET (1) Amber LED, indicates communication status of the Cresnet network
          PWR (1) Green LED, indicates power and status
        Enclosure
          Plastic, White
        Environmental
          Temperature 32° to 104°F (0° to 40°C)
          Humidity 0% to 90% RH (non-condensing)
        Dimensions
          Height 0.68 in (18 mm)
          Width 2.58 in (66 mm)
          Depth 2.49 in (64 mm)

         

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative in your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2014 Crestron Electronics, Inc.