Crestron® QMT® Motor for 38-Inch Roller Shades and Larger, Cresnet®
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
Featuring Quiet Motor Technology™, the CSM-QMT50-DCCN motor provides quiet yet robust operation for Crestron® roller shades 38 inches (96.52 cm) and larger. Fully integrated electronics eliminate the need for bulky add-on interface modules, allowing for a clean, streamlined installation. The CSM-QMT50-DCCN uses the dependable Cresnet® wire network for power and communications.
NOTE: The CSM-QMT50-DCCN is only available as part of a Crestron® shade system and cannot be ordered on its own. To configure shades or order shading parts and accessories, please use the Crestron Design Tool for Crestron Shading Solutions or call 1-855-53-S-H-A-D-E (537-4233) for support.
Featuring Quiet Motor Technology™, the CSM-QMT50-DCCN motor provides quiet yet robust operation for Crestron® roller shades 38 inches (96.52 cm) and larger. Fully integrated electronics eliminate the need for bulky add-on interface modules, allowing for a clean, streamlined installation. The CSM-QMT50-DCCN uses the dependable Cresnet® wire network for power and communications. An infiNET EX® wireless model of the motor, the CSM-QMT50-DCEX, is also available.
The CSM-QMT50-DCCN can integrate seamlessly into a Crestron control system to be operated from keypads, wireless remotes, and touch screens. For easy setup, a local three-button interface lets users test shades after installation and also set shade limits. Power is supplied to the CSM-QMT50-DCCN via dedicated Crestron power supplies, such as the CSA-PWS40 or CSA-PWS10S-HUB. The CSA-PWS10S-HUB is capable of distributing power to multiple shade motors from one unit, consolidating shade wiring to a central location.
QMT™ Quiet Motor Technology
The Crestron CSM-QMT50-DCCN shade motor utilizes the quiet, precision-controlled Quiet Motor Technology (QMT) to control the movement of the shade, keep track of the shade’s position, and adjust the shade to the user’s desired preset positions.
The CSM-QMT50-DCCN uses the dependable Cresnet wire network for communication between devices. The Cresnet bus offers easy wiring and configuration, carrying bidirectional communication and 24VDC power to each device over a simple 4-conductor cable.
- For shades 38 inches (96.52 cm) and larger
- Crestron® Quiet Motor Technology™ for nearly imperceptible operation
- Built-in Cresnet® wired communications
- Fully integrated design, with no external modules required
- 24 Volt low-voltage power
- Installs within shade motor tube
- Provides real-time activity and status feedback to processor
|Motor Specifications |
| ||Torque ||6 Nm |
| ||Motor Speed ||10-25 rpm |
| ||Duty Cycle ||6 min on/6 min off |
| ||Shade Widths Supported ||38 in to 192 in (96.52 cm to 487.68 cm) |
| ||Insulation Class ||III |
| ||Intrusion Protection (IP) ||31 |
|Power Requirements |
| ||Cresnet Power Usage ||50 Watts (2 Amps @ 24 Volts DC); requires a CSA-PWS series power supply, see Available Accessories for model numbers |
| ||Cresnet® |
| ||NET ||(1) 4-conductor pigtail with inline detachable terminal block |
|Controls & Indicators |
| ||LED ||(1) tri-color LED, indicates motor status |
| ||Buttons ||(3) tactile buttons, (1) Raise button raises shade, (1) Lower button lowers shade, (1) Setup button can set shade limits or reverse roll direction of shade |
| ||Temperature ||32° to 104°F (0° to 40°C) |
| ||Humidity ||10% to 90% RH (non-condensing) |
| ||Height ||2.5 in (63.4 mm) |
| ||Width ||2.5 in (63.4 mm) |
| ||Length ||31.50 in (800 mm) |
| ||5.52 lb (2.5 kg) |