Master photo:S-EXT1-S

Add to Favorites

S-EXT1-S

Sonnex® Link over Fiber Extender

Discontinued

This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

Extends the Sonnex® Link and provides electrical isolation for long-distance and/or outdoor wire runs.

Have a question?
Add to a Project
Find a Dealer

The Crestron® S-EXT1-S is an optional accessory for the Sonnex® Multiroom Audio System (SWAMP-24X8). It provides a solution for extending the Sonnex Link up to 2000 ft (610 m) over one multimode fiber strand[1]. It is ideal for any application that requires running the Sonnex Link between a main house and guest house, pool house, or other outbuilding, providing high-performance signal extension, plus optical isolation against lightning surges and other electrical disturbances.

The S-EXT1-S is composed of one transmitter and one receiver (S-TX1-S and S-RX1-S, both included). Each component can be mounted discretely in the back of an equipment rack or to any suitable flat surface. Linking the two components requires just one run of Crestron CresFiber® 8G fiber optic cable[1]. Crestron offers a full line of rugged CresFiber cables and installation tools for a complete solution.

 
Key Features
  • Extends the Sonnex® Link up to 2000 ft (610 m) over fiber
  • Works reliably without any programming or configuration
  • Transports 24 stereo channels of digital audio
  • Also carries Sonnex control signals
  • Protects against lightning surges for outdoor runs
  1. For connection between the S-TX1-S Transmitter and S-RX1-S Receiver, use Crestron CRESFIBER8G, CRESFIBER, CRESFIBER-SINGLE-SC, or third-party OM2/OM3 multimode fiber optic cable. The maximum cable length is 2000 ft (610 m). Do not connect to a DigitalMedia network or device, or to any other network or device. All wire and cables sold separately.
  2. For connection of the Sonnex Link, use Crestron DM-CBL-8G or high-quality CAT5e shielded twisted-pair cable. Do not connect to a DigitalMedia network or device, or to any other network or device. All wire and cables sold separately.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

 

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

 

Crestron, the Crestron logo, CresFiber, DigitalMedia, and Sonnex are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2013 Crestron Electronics, Inc.

 
Communications
  Sonnex® Link 64-channel (48 utilized) digital audio w/embedded control, auto-discovery, auto-negotiating
Connectors – S-TX1-S Transmitter
  MMF/SC OUT (1) SC female optical fiber connector;
Sonnex Link over Fiber output;
Connects to IN MMF/SC port of the S-RX1-S receiver via CresFiber 8G fiber optic cable[1]
  SONNEX DIGITAL IN (1) 8-wire RJ45 female;
Sonnex Link input;
Connects to SWAMP-24X8 Multiroom Audio System[2]
  12VDC .13 A (1) 2.5 x 5.5 mm DC power connector;
12 Volt DC power input (PW-1215WU power pack included)
Connectors – S-RX1-S Receiver
  MMF/SC IN (1) SC female optical fiber connector;
Sonnex Link over Fiber input;
Connects to OUT MMF/SC port of the S-TX1-S transmitter via CresFiber 8G fiber optic cable[1]
  SONNEX DIGITAL OUT (1) 8-wire RJ45 female;
Sonnex Link output;
Connects to SWAMPE Multiroom Audio Expander[2]
  12VDC .13 A (1) 2.5 x 5.5 mm DC power connector;
12 Volt DC power input (PW-1215WU power pack included)
Indicators – S-TX1-S Transmitter
  PWR (1) green LED, indicates operating power supplied via power pack
  SONNEX DIGITAL IN (1) green and (1) amber LEDs, green indicates link status and amber indicates data communication
  OUT MMF/SC (1) green LED, indicates fiber link status
Indicators – S-RX1-S Transmitter
  PWR (1) green LED, indicates operating power supplied via power pack
  SONNEX DIGITAL OUT (1) green and (1) amber LEDs, green indicates link status and amber indicates data communication
  IN MMF/SC (1) green LED, indicates fiber link status
Power Requirements
  Power Packs (2x) 130 mA @ 12 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-1215WU, quantity 2 included
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation S-TX1-S: 7 BTU/hr;
S-RX1-S: 7 BTU/hr
Enclosure (Typical of 2)
  Construction Aluminum w/polycarbonate label overlay and (4) integral mounting flanges
  Mounting Freestanding, surface mount, or attach to a single rack rail
Dimensions (Typical of 2)
  Height 1.42 in (37 mm)
  Width 3.75 in (96 mm)
  Depth 4.32 in (110 mm)
Weight
  S-TX1-S Transmitter 10 oz (284 g)
  S-RX1-S Receiver 10 oz (284 g)
Click here to search product certificates.
  1. For connection between the S-TX1-S Transmitter and S-RX1-S Receiver, use Crestron CRESFIBER8G, CRESFIBER, CRESFIBER-SINGLE-SC, or third-party OM2/OM3 multimode fiber optic cable. The maximum cable length is 2000 ft (610 m). Do not connect to a DigitalMedia network or device, or to any other network or device. All wire and cables sold separately.
  2. For connection of the Sonnex Link, use Crestron DM-CBL-8G or high-quality CAT5e shielded twisted-pair cable. Do not connect to a DigitalMedia network or device, or to any other network or device. All wire and cables sold separately.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

 

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

 

Crestron, the Crestron logo, CresFiber, DigitalMedia, and Sonnex are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2013 Crestron Electronics, Inc.

Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.
mgctlbxN$MZP mgctlbxV$5.2.4 mgctlbxL$C