Master Photo: HZ-KPEX-W: 5 Custom Engraved Small Push Buttons and HZ-FP-G1-W Faceplate (Sold Separately)
Add to Favorites

HZ-KPEX-W

Horizon™ In-Wall Keypad with infiNET EX® Wireless Communication, 120 VAC, White

Discontinued

This product has been replaced by the following model(s)

The HZ‑KPEX is a Horizon™ in‑wall keypad that features field‑replaceable and engravable LED backlit buttons. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations.

Faceplate Sold Separately

Have a question?
Add to a Project
Find a Dealer

The HZ‑KPEX is a Horizon™ in‑wall keypad that features field‑replaceable and engravable LED backlit buttons. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations.

NOTE: Faceplates are not included. Refer to the HZ‑FP‑G series faceplates for more information.

Multiway Dimming and Switching
Similar to traditional three‑ or four‑way circuits, the HZ‑KPEX lets you control the lights from multiple locations using the traveler wire.1 Up to four devices can be connected to a single dimmer or switch. The HZ‑KPEX provides local LED feedback for the status of the load connected to the master load controller along with backlit, engravable button caps to mimic the familiar feel of other Horizon products. The multiway controller provides instant usability upon installation without the need for programming.

Multigang Expansion
Up to four devices may be installed side‑by‑side in a multigang electrical box with a compatible Horizon faceplate (HZ‑FP‑G series).2 All buttons in a multigang arrangement align to form one continuous control surface.

infiNET EX Communications
infiNET EX wireless technology provides two‑way RF communications throughout a residential or commercial structure without the need for physical control wiring. Each infiNET EX device acts as an expander by sending command signals to other infiNET EX devices in range (approximately 150 ft (46 m) indoors) to ensure reliability and stability.1

The HZ‑KPEX communicates with a control system via a CEN‑GWEXER2 or newer infiNET EX Wireless Gateway. Up to 100 infiNET EX devices may coexist on a wireless network.

Field-Replaceable Button Caps
The preinstalled five button caps on the HZ‑KPEX are field replaceable, allowing for various engravable button configurations.

Multicolor Backlit Button Engraving
Horizon keypad buttons are laser engravable to identify each button's function. RGB LED backlights illuminate the engraved labels and can be adjusted for custom color backlighting. A built‑in ambient light sensor enables auto‑dimming of the backlight brightness according to day and night mode presets.

Each button's backlight provides feedback by changing color, intensity, or both. The backlight can also flash to show that an action is being performed.

Customizable Faceplates
Horizon device faceplates (sold separately) are customizable for any décor. Color‑matched top and bottom trim pieces may be swapped easily after installation with custom trim fabricated from solid materials such as wood, metal, marble, engineered stone, or Corian® solid surface. Contact a Crestron representative, or refer to Crestron True Blue Support Online Help Answer ID: 1000140, to obtain specifications and CADs for the fabrication of custom trim. Paintable trim is also available separately.

Note: The faceplate trim is attached magnetically, which may inhibit use in locations where tampering may occur.

 
Key Features
  • Can act as a multiway controller for a connected dimmer or switch (HZ‑DIMEX, HZ‑DIMUEX, and HZ‑SWEX)
  • Capable of being powered by either 120 VAC line voltage or 60 VDC low voltage 3
  • Line based multiway control for reliability across all load types
  • Single‑gang U.S. wall box installation
  • Requires neutral wire connection
  • Gangable up to four across using Crestron® Horizon™ device compatible multi‑gang faceplates (HZ‑FP‑G series, sold separately)
  • Robust infiNET EX® wireless communication
  • Configurable with up to five field‑replaceable buttons
  • Custom backlit laser‑etched engravable buttons
  • Multicolor RGB LED backlighting
  • Auto‑dimming day/night backlight modes
  • Local button for load control without programming
  • Fully programmable via a Crestron control system
  • Crestron Home™ OS 3 compatible
  1. The HZ‑KPEX cannot be used to control a load directly. It must be used in conjunction with a HZ‑DIMEX, HZ‑DIMUEX, or HZ‑SWEX.
  2. Item(s) sold separately.
  3. Requires a SolaHD® SDP™ 1-48-100T power supply.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at patents.crestron.com.

Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

Crestron, the Crestron logo, Crestron Home, Horizon, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. SolaHD and SDP are either a trademark or registered trademark of APPLETON GRP LLC in the United States and/or other countries. Corian is either a trademark or registered trademark of DuPont de Nemours, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.

 
CrestronHome
mgctlbxN$MZP mgctlbxV$5.2.4 mgctlbxL$C