Operating System |
|
Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; SIMPL Windows™, SIMPL+®, and SystemBuilder™ programmable |
Memory |
|
Flash |
8 MB |
|
SDRAM |
32 MB |
|
NVRAM |
256 KB |
Communications |
|
Ethernet |
10/100 Mbps; auto-switching; auto-negotiating; auto-discovery; full/half duplex; TCP/IP; UDP/IP; SNMP; built-in Web server and SMTP e-mail client; supports Crestron Mobile™, e-Control® 2 XPanel, and RoomView™ applications |
|
Cresnet® |
Cresnet master mode |
|
RS-232 |
Supports 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking; supports computer console via rear panel COMPUTER port |
|
IR/Serial |
Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud |
Audio |
|
Typical of 6 Room Outputs: |
|
Controls |
Volume, Balance, Bass, Treble, Loudness, Mute, Mono, Input Compensation |
|
Volume Gain Range |
-80dB to +20dB, 1 dB steps |
|
Mute |
-100dB (electronic), -120dB (relay) |
|
Input Compensation |
±10dB |
|
Bass Gain Range |
±12dB @ 100Hz, 2 dB steps |
|
Treble Gain Range |
±12dB @ 10kHz, 2 dB steps |
|
Frequency Response |
20Hz to 20kHz ±0.75dB |
|
S/N Ratio |
98dB, 20Hz to 20kHz A-weighted |
|
THD+N |
0.05%, 20Hz to 20kHz |
|
Stereo Separation |
>75dB |
|
Output Power |
45 Watts per channel at 8 Ohms, 60 Watts per channel at 4 Ohms |
FM Tuner |
|
Typical of 2: |
|
Frequency Range |
87.50 to 108 MHz (50 or 100 kHz steps) |
|
Intermediate Frequency |
10.7 MHz |
|
Usable Sensitivity |
11 dBf mono |
|
S/N Ratio |
64dB @ 65 dBf mono; 60dB @ 65 dBf stereo |
|
IF Rejection |
100dB |
|
AM Rejection |
55dB |
|
Stereo Separation |
40dB |
AM Tuner |
|
Typical of 2: |
|
Frequency Range |
530 to 1710kHz (9 or 10 kHz steps) |
|
Sensitivity |
3.5µV (RF input level 10dB S+N/N) |
|
Selectivity |
10kHz |
|
Alternate Channel Selectivity |
55dB |
|
Image Rejection |
35dB |
|
IF Rejection |
60dB |
LCD Display |
|
Green LCD alphanumeric, adjustable backlight, 2 lines x 20 characters per line |
Controls and Indicators |
|
STANDBY |
Pushbutton with green LED, places audio in standby |
|
MUTE |
Pushbutton with red LED, mutes audio in selected room |
|
MODE/MENU |
(8) Pushbuttons, select mode or menu item for adjustment: SOURCE, ROOM, PRESETS, MENU, BKLT, SCHED, DISPLAY, MORE (refer to manual); SOURCE, ROOM, and PRESETS pushbuttons each include a green LED |
|
ROOM |
(6) Pushbuttons with green LEDs and backlit labeling strip, select room(s) to adjust |
|
SELECT |
2-position up/down pushbutton with adjoining “enter” pushbutton for selecting rooms, sources, and radio stations |
|
VOLUME |
2-position up/down pushbutton, adjusts volume of selected room |
|
H |
Hardware reset button, recessed, reboots the control system |
|
S |
Software reset button, recessed, restarts the SIMPL program |
Connectors – Audio |
|
SOURCES 1 – 4 |
(16) RCA female providing (4) unbalanced stereo line-level audio inputs with parallel loop-thrus; connect to outputs of source devices, with loop-thru to AAE;
Maximum Input: 3.2 Vrms (flat);
Input Impedance: 47k ohms |
|
TUNER OUT A |
(2) RCA female providing unbalanced stereo line-level audio output from AM/FM Tuner A; provides tuner output to feed AAE audio expander;
Maximum Output: 1 Vrms @ 1kHz;
Output Impedance: 100 ohms |
|
TUNER OUT B |
(2) RCA female providing unbalanced stereo line-level audio output from AM/FM Tuner B; provides tuner output to feed AAE audio expander;
Maximum Output: 1 Vrms @ 1kHz;
Output Impedance: 100 ohms |
|
ROOMS 1 – 6 |
(12) 2-pin 7.62mm detachable terminal blocks, power amplifier outputs;
Wire Size: 12 AWG maximum;
Output Power (per Channel): 45 Watts at 8 ohms, 60 Watts at 4 ohms |
|
FM ANT A - B |
(2) IEC 169-2 coaxial (IEC-to-F adapters included);
(2) FM wire antennas included;
Impedance: 75 ohms |
|
AM ANT A - B |
(2) 2-pin spring-loaded terminals;
(2) AM shielded loop antennas included;
Impedance: 50 ohms |
Connectors – Control |
|
NET 1 – 6 |
(6) 4-pin 3.5mm detachable terminal blocks;
Cresnet Master ports, provide data and power for keypads and other Cresnet devices |
|
IR OUT 1 – 4 |
(4) 3.5mm TRS mini-phone jacks, IR ports;
IR output up to 1.2 MHz |
|
COM A |
(1) DB9 male, bidirectional RS-232 port
Up to 115.2k baud, hardware and software handshaking support |
|
COMPUTER |
(1) 6-pin RJ11 female, bidirectional RS-232 computer console port |
|
LAN |
(1) 8-wire RJ45 with 2 LED indicators, 10Base-T/100Base-TX Ethernet port;
Green LED indicates link status, Yellow LED indicates Ethernet activity |
|
NET |
(2) 4-pin 3.5mm detachable terminal blocks;
Cresnet Master ports, paralleled with NET ports 1 through 6;
Normally connect to AAE(s) |
Connectors – Power |
|
FUSE |
Main fuse, T8AH;
(1/4” x 1-1/4”, 250V, 8A, time-lag, high-rupture rated) |
|
120V~50-60Hz |
(1) IEC C14 male chassis plug; mates with removable power cord (included) |
|
G |
6-32 screw, chassis ground lug |
Power Requirements |
|
Main Power |
850 Watts (7 Amps) @ 120 Volts AC, 50-60Hz |
|
Available Cresnet Power |
20 Watts (0.83 Amps @ 24 Volts DC) |
Environmental |
|
Temperature |
41° to 104°F (5° to 40°C) |
|
Humidity |
10% to 90% RH (non-condensing) |
|
Heat Dissipation |
650 BTU/hr @ 8 ohms, 750 BTU/hr @ 4 ohms; all channels loaded to 1/8 full power |
Enclosure |
|
Black metal with molded ABS/PC front panel;
Freestanding, side ventilation should not be restricted |
Dimensions |
|
Height |
5.64 in (144 mm) |
|
Width |
17.16 in (436 mm) |
|
Depth |
18.11 in (460 mm) |
Weight |
|
38.0 lb (17.24 kg) |
INTERNATIONAL VERSION (230 VAC) |
|
AADSI |
|
All the features and specifications of the AADS except: |
|
Connectors (partial) |
|
FUSE |
Main fuse, T4AH;
(5mm x 20mm, 250V, 4A, time-lag, high-rupture rated) |
|
230V~50-60Hz |
(1) IEC C14 male chassis plug; mates with removable power cord (included) |
|
Power Requirements |
|
Main Power |
850 Watts (3.5 Amps) @ 230 Volts AC, 50-60Hz |
|
Available Cresnet Power |
20 Watts (0.83 Amps @ 24 Volts DC) |