Power Supply for FT2 ELEC Series
Designed for use with a Crestron FT2 ELEC series FlipTop™. One is included with each FlipTop, and a second may be purchased as required to support installations using two USB Rapid Charging Modules.
Configure your FlipTop now!
Launch Configurator
The FT2A-UTK-PWS is a power supply designed for use with a Crestron FT2 ELEC series FlipTop™. A single power supply is included with each FlipTop. A second power supply may be purchased separately when required to support more than one (but not more than two) USB Rapid Charging Modules (model FT2A-CHGR-USBA/C). Each FT2A-UTK-PWS includes a mounting bracket, which allows attachment of the power supply to the FlipTop chassis beneath the table. A maximum of two power supplies may be connected to a single FlipTop.
| Output Rating |
| 24 Volts DC, 2.5 Amps, regulated |
| Power Requirements |
| 1.3 Amps (maximum) @ 100-240 Volts AC, 50/60 Hz |
| Connections |
| Line |
(1) IEC 60320 C7 main power inlet;
Mates with removable power cord, included |
| Load |
(1) 6 ft (1.83 m) attached cable with 2.1 x 5.5 mm DC power barrel connector;
Center pin + |
| Environmental |
| Temperature |
32° to 113° F (0° to 45° C) |
| Humidity |
10% to 90% RH (non-condensing) |
| For indoor use only |
| Construction |
| Composition |
Plastic, black, includes mounting bracket |
| Mounting |
• Attaches beneath the table to mounting slots on the front, left, or right side of the FlipTop chassis;
• Requires approximately 10 inches (254 mm) minimum vertical clearance beneath the top surface of the table;
• Projects 1.57 inches (40 mm) from the front or side of the FlipTop chassis beneath the table (requires an additional 0.2 inch or 5 mm for installation) |
| Dimensions |
| Height |
4.91 in (125 mm) |
| Width |
2.21 in (57 mm) |
| Depth |
1.57 in (40 mm) |
| Weight |
| TBD |
| Compliance |
| UL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device |
Click
here to search product certificates.
