Four-channel LED controller for RGBW color mixing, wirelessly-controlled via ultra-reliable infiNET EX® communications technology.
Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.
The Crestron® CLC-1LEDPWM-RGBW-EX provides four independently controlled channels of RGBW color mixing for LEDs. Achieve spectacular colored accent lighting to highlight architectural features, provide mood lighting, or spread a little holiday cheer. Choose from an array of white hues on any or all of the four channels to boost the general room illumination. This RGBW LED Controller uses a configurable Pulse Width Modulation (PWM) frequency for flicker-free performance. Over-current protection ensures the long life of this LED controller.
infiNET EX®
Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption.[1]
The CLC-1LEDPWM-RGBW-EX communicates with a Crestron control system via an infiNET EX Wireless Gateway (model CEN-GWEXER, DIN-AP3MEX, or MC3[2]). Up to 100 infiNET EX devices may coexist on a single wireless network, and every device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths.[1] Built-in Dynamic Frequency Allocation continuously monitors RF conditions, automatically selecting the clearest channel to prevent interference from neighboring networks, cordless phones, and microwaves.
Key Features
- 4 independently-controlled channels of RGBW color mixing for LEDs
- Multiple white hues on any or all four channels
- Configurable PWM for flicker-free performance
- Over-current protection
- infiNET EX® wireless communications
| Load Ratings |
| |
Load Type |
LED |
| |
Max Load Rating |
Total of 4 Amps |
| |
Load Rating Per Channel |
4 Amps |
| |
PWM Default |
1,000 Hz;
Configurable for 24 Hz to 1,200 Hz |
| Load Ratings |
| |
Load Type |
LED |
| Wireless Communications |
| |
RF Transceiver |
infiNET EX® 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15;
IEEE 802.15.4 compliant |
| |
Range (Typical) |
150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s);
Subject to site-specific conditions and individual device capabilities[1] |
| |
Gateway |
Requires an infiNET EX gateway[1] |
| Power Requirements |
| |
Control |
12 Volts DC to 24 Volts DC (to match the LEDs) |
| |
Max Current Capacity |
4 Amps |
| Connections |
| |
+, +, R, G, B, W |
(6) 2-pin 3.5 mm detachable terminal block output ports |
| |
PWR |
(1) 2-pin 3.5 mm detachable terminal block;
24 Volts DC power input |
| Controls & Indicators |
| |
(1) Pushbutton, for Test mode and Acquire mode |
| |
(1) Red and green LED, indicates power and status |
| Environmental |
| |
Temperature |
32° to 104° F (0° to 40° C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| Construction |
| |
Plastic, black, (2) integral surface mounting flanges, vented sides |
| Dimensions |
| |
Height |
0.68 in (18 mm) |
| |
Width |
2.58 in (66 mm) |
| |
Depth |
2.49 in (64 mm) |
| Weight |
| |
1.6 oz (45 g) |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.
