10-Motor Power Supply and Cresnet® Hub
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
For a replacement, please see
CSA-PWS10S-HUB-ENET.
Powers up to 10 Crestron® Quiet Motor Technology™ roller shade or drapery system motors and features a built-in, 5-segment Cresnet® hub with network diagnostics capabilities.
The CSA-PWS10S-HUB Power Supply powers up to 10 Crestron® Quiet Motor Technology™ roller shade or drapery system motors and features a built-in, 5-segment Cresnet® hub with network diagnostics capabilities. A local control interface with LED feedback indicators allows roller shade or drapery systems to be tested without a control system connection. The CSA-PWS10S-HUB is convection cooled for silent operation and can be surface mounted. Crestron offers model CSA-PWS10S-HUB-CAEN-1X1 as part of a pre-assembled CAEN-1X1 enclosure, which can be surface mounted or recessed in a wall.
Quick Troubleshooting
The built-in diagnostics featured on the CSA-PWS10S-HUB enable the user to automatically shut down any branch with a fault, identify the exact problem (e.g., Y shorted to Z, Z shorted to GND, fuse blown) without a multi-meter, and trigger program events based on problems detected by the power supply (e.g., notices on touch screens and emails to the service department).
Key Features
- Support for up to 10 Crestron® roller shade motors, 10 drapery system motors, or a combination of the two up to a total of 10
- Built-in 5-segment Cresnet® hub
- Individual per-motor fuse protection
- Local shade and drapery master controls
- Clear diagnostic LED indicators
- Convection cooled for silent operation
- Available pre-assembled in CAEN-1X1 enclosure
| Load Rating |
| |
Total Motors Supported |
Provides power for up to (10) Crestron® roller shade motors, (10) drapery system motors, or a combination of the two up to a total of (10) motors with each motor homerun to the power supply;
10 Drapery System solutions carry 145 lbs load each
|
| |
Output |
24 Volts DC 50 Watt Output
350 Watts Total Continuous Load
425 Watts 2 minutes ON, 2 minutes OFF Discontinuous Shade Load
|
| |
Load Protection |
(10) Self-resetting thermal fuses and (10) replaceable 4 Amp time lag fuses, (1) of each per output |
| Power Requirements |
| |
Line Power |
120-240 Volts AC, 50/60 Hz, 5 Amps max |
| Connections |
| |
NET HOST IN, OUT |
(2) 4-pin 5 mm detachable terminal blocks;
Cresnet slave ports, paralleled;
Connect to Cresnet® control network, power not supplied to these connections;
Cresnet power output ports with data pass-through |
| |
A-E, 1-10 |
(10) 4-pin 5 mm detachable terminal blocks comprising (2) Cresnet ports per each of (5) hub segments |
| |
USB |
(1) USB Type B female, USB computer console port |
| |
Line Power (CSA-PWS10S-HUB) |
(1) Attached input power cable (~10 in long, 254 mm) with inline IEC 60320 C14 main power inlet;
Mates with removable power cord (included) |
| |
Line Power (CSA-PWS10S-HUB-CAEN-1X1) |
(1) Attached input power cable (~10 in long, 254 mm) with inline IEC 60320 C14 main power inlet;
Connects to AC power source using grounded pigtail cable and terminal block (both included) |
| LED Indicators |
| |
PWR 1-10 |
(10) Green LEDs, indicate 24 Volts present at each corresponding output |
| |
NET A-E |
(5) Amber LEDs, indicate Cresnet activity on each corresponding hub segment |
| |
NET HOST |
(1) Amber LED, indicates Cresnet activity with control system |
| |
MSG |
(1) Red LED, indicates error messages and Test mode |
| Enclosure |
| |
MASTER UP |
(1) Pushbutton, press and hold to raise all connected shades |
| |
MASTER DOWN |
(1) Pushbutton, press and hold to lower all connected shades |
| |
TEST |
(1) Pushbutton, initiates diagnostic test |
| |
RESET |
(1) Recessed pushbutton, forces hardware reset |
| Enclosure |
| |
CSA-PWS10S-HUB |
Metal, grey, surface mount (indoor use only) |
| |
CSA-PWS10S-HUB-CAEN-1X1 |
Includes CAEN-1X1, 16-gauge galvanized steel enclosure with vented grey steel cover;
Surface mount or recess mount in a wall (indoor use only) |
| Environmental |
| |
Temperature |
32° to 104° F (0° to 40° C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| Dimensions |
| |
CSA-PWS10S-HUB |
| |
Height |
7.60 in (194 mm) |
| |
Width |
12.97 in (330 mm) |
| |
Depth |
2.66 in (68 mm) |
| |
CSA-PWS10S-HUB-CAEN-1X1 |
| |
Height |
16.57 in (421 mm) |
| |
Width |
16.10 in (409 mm) |
| |
Depth |
4.44 in (113 mm) |
| Weight |
| |
CSA-PWS10S-HUB |
5.6 lbs (2.54 kg) |
| |
CSA-PWS10S-HUB-CAEN-1X1 |
15 lbs (6.8 kg) |
| Standards & Certifications |
| |
UL Listed |
Click
here to search product certificates.
Specifier Resources
Specification: Roller Window Shades (DOCX) Engineering Specs
Motorized Roller Window Shades Window Treatments Construction Specifications Institute documents for architects, engineers, specifiers and contractors.
Specification: Roller Window Shades (PDF) Engineering Specs
Motorized Roller Window Shades Window Treatments Construction Specifications Institute documents for architects, engineers, specifiers and contractors.
