Master photo:DMC-F
Add to Favorites

DMC-F

DigitalMedia™ Fiber Input Card for DM® Switchers

Discontinued

This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

Provides a single DM® Fiber input for any DigitalMedia™ Switcher with modular plug-in input card slots.

Have a question?
Add to a Project
Find a Dealer

The DMC-F is an input card for a Crestron® DigitalMedia™ Switcher, providing one DM® Fiber input. The DM Fiber input enables the connection of a DM Fiber Transmitter, or the output of another DM switcher, with a potential cable length up to 1000 feet (300 m) using multimode fiber optic cable[1].

In addition to the DM Fiber input, the DMC-F also includes HDMI® and stereo analog audio outputs. The HDMI output can be used to pass the input signal through to a local audio processor or video monitor, or to feed a second DM switcher for output expansion purposes. The analog audio output, which features programmable volume control, breaks out the stereo audio signal from the DM Fiber input and passes it through to feed a multi-room audio distribution system.[2]

NOTE: For applications requiring the simultaneous distribution of surround sound and 2-channel audio signals, use model DMC-F-DSP.

The DMC-F may also be used with the DMCI DigitalMedia Card Interface to provide a DM Fiber receiver solution that's perfect for installation in an equipment rack or AV cart, or as a portable display interface. As a DM Fiber receiver, and as a DM switcher input card, the DMC-F enables EDID signal detection and format management, CEC device control, and audio breakaway.

Please refer to the DigitalMedia Resources Webpage at http://www.crestron.com/dmresources/ for additional design tools and reference documents.

 
  1. The maximum DigitalMedia Fiber cable length is 1000 ft (300 m) using CRESFIBER, CRESFIBER8G, CRESFIBER-DUAL-SC, or generic OM2/OM3 duplex multimode fiber optic cable. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. All wire and cables sold separately.
  2. The analog stereo audio output is only active when the input source is outputting a 2-channel stereo signal. For applications using a multi-channel surround sound source, use model DMC-F-DSP which provides simultaneous surround sound and stereo down-mix output signals.
  3. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables available separately.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

 

Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

 

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

 

CresFiber, Crestron, DigitalMedia, DM, and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS and DTS-HD Master Audio are either trademarks or registered trademark of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.

 
mgctlbxN$MZP mgctlbxV$5.2.4 mgctlbxL$C