| Communications |
| |
Ethernet |
10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, Private Network Mode, HTTPS web browser setup and control, Crestron control system integration |
| |
Dante |
Dante network interface via LAN port or dedicated DANTE port [1] |
| |
USB |
USB 2.0 host for USB mass storage devices, supports save/load of configuration and EDID settings, supports firmware update |
| Video |
| |
Preview Scaler |
(1) 4K video scaler for switcher’s front panel preview monitor, motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion, content-adaptive noise reduction |
| |
Maximum Source Resolutions
Scan
Type |
Resolution |
Frame
Rate |
Color
Sampling |
Color
Depth |
| Progressive |
4096x2160 DCI 4K
&
3840x2160 4K UHD |
24 Hz |
4:4:4 |
30 bit |
| 30 Hz |
4:4:4 |
24 bit |
| 30 Hz |
4:2:2 |
36 bit |
| 60 Hz |
4:2:0 |
24 bit |
| 2560x1600 WQXGA |
60 Hz |
4:4:4 |
36 bit |
| 1920x1080 HD 1080p |
60 Hz |
4:4:4 |
36 bit |
| Interlaced |
1920x1080 HD 1080i |
30 Hz |
4:4:4 |
36 bit |
|
| |
NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz |
| Audio |
| |
Input Signal Types |
Dante [1] |
| |
Output Signal Types |
Dante [1], analog stereo for local monitoring |
| |
Dante I/O |
Up to 120 stereo channels in and/or out at up to 24-bit 48 kHz [1] |
| |
Analog Output Downmix Decoding |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS HD Master Audio, DTS-X®, LPCM up to 8 channels |
| |
Digital-To-Analog Conversion |
24-bit 48 kHz |
| |
Analog Volume Adjustment |
-80 to 0 dB plus mute, adjustable via switcher’s front panel touch screen or web browser |
| Connectors |
| |
LAN |
(1) 8-pin RJ45 connector, shielded, female;
10Base-T/100Base-TX/1000Base-T Ethernet LAN port |
| |
DANTE |
(1) 8-pin RJ45 connector, shielded, female;
1000Base-T Dante network port [1] |
| |
USB |
(1) USB Type A connector, female;
USB 2.0 host port for connection of a USB flash drive;
For save/load of configuration and EDID settings and for firmware update |
| |
AUDIO OUT |
(1) 5-pin 3.5mm detachable terminal block;
Balanced/unbalanced stereo line-level output for local monitoring;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced |
| Controls & Indicators |
| |
ACT |
(1) Green LED, indicates CPU activity |
| |
MSG |
(1) Red LED, indicates CPU has generated an error message |
| |
CPU RESET |
(1) Recessed pushbutton, reboots the CPU and front panel |
| |
LAN |
(2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity |
| |
DANTE |
(2) LEDs, green LED indicates Dante network link status, amber LED indicates Dante network activity |
| Construction |
| |
Plug-in blade, occupies the CPU blade slot of a DM-MD128X128 switcher, includes metal faceplate w/black finish |
| Weight |
| |
1.6 lb (726 g) |
| Compliance |
| |
CE, IC, FCC Part 15 Class B digital device |
