UC Engine Assembly with UC-ENGINE-Z, HD-CONV-USB-200, & UC-CONN-HD
All the central components of a Crestron Flex UC system, assembled together on a bracket and ready to mount behind the display device. Designed for use with a Crestron Flex UC system solution.
The UC Engine Assembly (UC-BRKT-100-Z-ASSY) streamlines the installation of a Crestron Flex UC system by incorporating the UC-ENGINE-Z, HD-CONV-USB-200, and UC-CONN-HD together on one convenient mounting bracket.
The complete assembly can be mounted on the wall, or it can be attached to the rear of the display device. Attachment to the display is accomplished using two of the four bolts that also affix the display to a VESA® compliant display mount. The assembly bracket includes mounting holes on its left and right side edges, spaced at 100, 200, and 300 mm vertically, to allow for attachment to either side of a mounting plate on the rear of a display.
To manage wiring and conceal connections for a clean, secure installation, a 1-gang sized cutout at the lower right-hand corner allows for mounting over a flush wall-mounted electrical box. The box may be used for an AC outlet or a wall plate containing AV and data jacks.
This product is sold exclusively as part of a complete Crestron Flex system kit.
- Preassembled mounting bracket with UC Engine, HDMI® to USB Converter, and EDID Emulator
- Security covers conceal and protect connections
- Multiple cable tie points with reusable cable ties
- Mounts cleanly to the wall or behind a display device
- Includes VESA® 100, 200, or 300 mounting holes for left or right side mounting to the back of the display
- Single-gang cutout accommodates an AC outlet or AV/data jack (in-wall box or mud-ring required)
UC Engine for Zoom Rooms™ video
||HDMI to USB 3.0 converter for content ingest
||EDID emulator for UC Engine display output
|USB cable for HDMI to USB converter, USB 3.0 Type-B male to Type-A male, 3 ft (1 m)
||Metal mounting bracket, black; preassembled with components, cable management, and security covers attached
||Surface wall mountable behind the display device using screws and anchors
||Attachable to the rear of the display device via two bolts that also attach the display to a VESA compliant display mount; includes mounting holes on both side edges, spaced 100, 200, and 300 mm vertically, to allow for attachment at either side of the display mounting plate (VESA display mount not included)
||16.00 in. (407 mm)
||14.00 in. (356 mm)
||1.62 in. (41 mm)