Digital QMT® Shade Motor for QMT5 Series, 4 Nm, infiNET EX® Communications
An ultra‑quiet, ultra‑reliable brushless motor for Crestron® roller shades 18 to 133 in. (458 to 3,379 mm) wide, depending on fabric and shade height. infiNET EX® communications provides a wireless interface for programming, monitoring, and control.
NOTE: The CSM‑QMTDC‑250‑4‑EX is only available as part of a Crestron® shade system and cannot be ordered on its own. To configure shades or order shading parts and accessories, please use the Crestron Design Tool for Crestron Shading Solutions or call 1‑855‑53‑S‑H‑A‑D‑E (537‑4233) for support.
Featuring Digital Quiet Motor Technology™, the CSM‑QMTDC‑250‑4‑EX motor provides quiet yet robust operation for Crestron® roller shades 18 to 133 in. (458 to 3,379 mm) wide, depending on fabric and shade height. Fully integrated electronics eliminate the need for bulky add‑on interface modules, allowing for a clean, streamlined installation.
The CSM‑QMTDC‑250‑4‑EX can integrate seamlessly into a Crestron control system, allowing it to be operated alone or as part of a group using keypads, wireless remotes, touch screens, and mobile devices. Setup controls are included on the CSM‑QMTDC‑250‑4‑EX to facilitate setup, testing, and adjustment of shade limits by the installer.
For a wired shade motor alternative with Cresnet® technology, see model CSM‑QMTDC‑250‑4‑CN.
Digital Quiet Motor Technology
The shade motor utilizes the quiet, precision‑controlled Quiet Motor Technology to control the movement of the shade, keep track of the shade’s position, and adjust the shade to the user’s desired preset positions.
infiNET EX® Wireless Communication
infiNET EX wireless technology provides two‑way RF communications throughout a residential or commercial structure without the need for physical control wiring. Each infiNET EX device acts as an expander by sending command signals to other infiNET EX devices in range (approximately 150 ft (46 m) indoors) to ensure reliability and stability.1
The Crestron® Shading Solutions communicates with a Crestron control system via an infiNET EX Wireless Gateway (CEN‑GWEXER or CEN‑GWEXER‑PWE, both sold separately). Up to 100 infiNET EX devices may coexist on a single wireless network.
Power Supply
Power is supplied to the CSM‑QMTDC‑250‑4‑EX via a dedicated power supply (CSA‑PWS40, sold separately) or a 10‑motor power supply (CSA‑PWS10S‑HUB‑ENET, sold separately).
Key Features
- Designed for use with Crestron® QMT®5 Series Architectural or QMT5 Series Décor System shade hardware
- For roller shades 18 to 133 in. (458 to 3,379 mm) wide, depending on fabric and shade height
- Digital Quiet Motor Technology™ achieves nearly inaudible operation
- Long ‑life brushless motor design ensures ultimate reliability
- Patented automatic torque calibration technology detects obstructions to prevent damage
- Starts and stops are smooth and precise
- Programmable stop points afford customizable scene presets
- Real ‑time remote activity monitoring and status feedback
- Local pushbutton interface for setup and testing
- Onboard multicolor diagnostic LED
- Fully integrated electronics — no external interface module required
- infiNET EX® wireless communications
- Powered using 24 VDC low ‑voltage , Class 2 wiring
- Limited Lifetime Warranty
Motor |
Torque |
4 Nm |
Motor Speed |
10‑30 RPM |
Duty Cycle |
8 minutes on / 40 minutes off at 4 Nm |
Shade Widths Supported |
18 to 133 in. (458 to 3,379 mm);
Depending upon shade height and fabric selection
|
Protection Class |
IEC 61140 Class III |
Power Requirements |
24 VDC |
42.5 W (1.8 A @ 24 VDC);
Requires a CSA‑PWS40 or CSA‑PWS10S‑HUB‑ENET power supply
(all sold separately)
|
Wireless Communications |
RF Transceiver |
infiNET EX® 2‑way RF, 2.4 GHz ISM Channels 11‑26 (2400 to 2483.5 MHz), default channel 15;
IEEE 802.15.4 compliant |
Range (Typical) |
150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s);
Subject to site‑specific conditions and individual device capabilities1 |
Gateway |
Requires an infiNET EX gateway (sold separately) |
Connectors |
24 VDC |
(1) 2‑conductor attached lead with inline detachable terminal block;
Connection is used to provide power only. This product does not allow for data communication via Cresnet. |
Controls and Indicators |
UP, SET, DN |
(3) Pushbuttons for setup and testing |
Status |
(1) Multicolor LED for motor status indication and diagnostics |
Environmental |
Temperature |
32° to 104° F (0° to 40° C) |
Humidity |
10% to 90% RH (noncondensing) |
Dimensions |
Diameter |
2.50 in. (64 mm) |
Length |
13.30 in. (338 mm) |
Weight |
2.0 lb (908 g) |
Compliance |
IC, FCC Part 15 Class B Digital Device |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.