Master Photo: HD-RXC-101-C-1G-E-B-T: Front with faceplate
Add to Favorites

HD-RXC-101-C-1G-E-B-T

DM Lite® Receiver for HDMI®, IR, and RS-232 Signal Extension over CATx Cable, Wall Plate, Black Textured

Discontinued

This product has been replaced by the following model(s)

Pairs with a DM Lite® transmitter to provide a simple point-to-point signal extender for HDMI® signals up to UHD and 4K, plus RS-232 and IR.

Have a question?
Add to a Project
Find a Dealer

The HD-RXC-101-C-1G-E-B-T is a wall plate DM Lite® wall plate receiver designed to pair with a DM Lite transmitter to form a signal extender for HDMI®, RS-232, and IR signals. The DM Lite family of products offers a versatile solution for extending HD, UHD, 2K, and 4K video signals with stereo or surround sound audio over a single CAT5e (or higher) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K. In addition to video and audio, the HD-RXC-101-C-1G-E-B-T supports the extension of RS-232 and IR control signals in either direction.1

For applications requiring a surface-mountable version, refer to the HD-RXC-101-C-E product page. For applications that do not require IR or RS-232 signal extension, refer to the HD-RX-101-C-1G-E-B-T product page.

The HD-RXC-101-C-1G-E-B-T is designed to mount into a single-gang electrical box or plaster ring (not included). When paired with a surface-mountable transmitter, the HD-RXC-101-C-1G-E-B-T is powered by the transmitter over the DM Lite link cable.2

NOTE: This product is not addressable from a control system and offers no programmable functionality. AV, CEC, IR, and RS-232 signals are simply passed through between a single transmitter and receiver pair. The RJ-45 link port on this product is exclusively intended for linking with a single DM Lite transmitter. It should not be used to connect to any other equipment or network. DM Lite technology is not compatible with PoE, PoDM, DigitalMedia 8G+®, or HDBaseT® technology.

 
Key Features
  • Pairs with a DM Lite® transmitter
  • Enables extension of HDMI®, RS-232, and IR signals
  • Links to the transmitter via a single CAT5e (or higher) twisted pair cable
  • Supports 4K and UHD at up to 130 ft (40 m)
  • Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)
  • Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
  • Handles 3D video and Deep Color
  • Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
  • Compatible with HDMI and DVI display devices
  • HDCP 2.2 compliant
  • Passes CEC and EDID signals
  • Installs in a single-gang U.S. electrical box (2-1/4” deep) or plaster ring
  • Decorator-style faceplate sold separately
  • Normally powered by the transmitter (surface-mountable) over the link cable
  1. For the DM Lite link cable, use Crestron DM-CBL-8G DigitalMedia 8G™ cable, Crestron DM-CBL-ULTRA DigitalMedia™ Ultra cable, or third-party CAT5e (or higher). The maximum cable length is 230 ft (70 m) for resolutions up to 2K or 130 ft (40 m) for higher resolution signals up to 4K. Refer to the “Maximum DM Lite Link Cable Lengths” table for a more detailed overview. Shielded cable and connectors are required when bundling multiple cables in a wire run, and are recommended for all applications to safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p. Wire and cables are sold separately. DM Lite devices are not compatible with DigitalMedia 8G+, HDBaseT, PoE, PoDM, or any other CATx based interface or network.
  2. For applications in which the HD-RXC-101-C-1G-E-B-T is paired with a 1-gang transmitter (HD-TXC-101-C-1G-E-B-T or HD-TXC-101-C-1G-E-W-T), refer to Online Help Answer ID 1000168. A power pack must not be connected to both the receiver and transmitter simultaneously. DM Lite devices are not compatible with PoE or PoDM.
  3. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.

 

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

The specific patents that cover this and other Crestron products are listed online at https://www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit https://www.crestron.com/opensource.

Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G, DM 8G+, and DM Lite are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries.  DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDBaseT is either a trademark or registered trademark of HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2021 Crestron Electronics, Inc.

 
4K HDCP 2.2 AVF Works With (2)
mgctlbxN$MZP mgctlbxV$5.2.4 mgctlbxL$C