Video |
Input Signal Type |
DisplayPort™ over USB-C® (DisplayPort Alt Mode) with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support2 |
Output Signal Type |
DM Lite® with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support2 |
Copy Protection |
HDCP 2.3 |
Resolutions |
Common resolutions are listed in the following table. |
Progressive |
4096x2160 DCI 4K & 3840x2160 4K UHD |
24 Hz |
4:4:4 |
12 bit |
30 Hz |
4:4:4 |
12 bit |
60 Hz |
4:2:2 |
12 bit |
60 Hz |
4:4:4 |
8 bit |
2560x1600 WQXGA |
60 Hz |
4:4:4 |
8 bit |
1920x1080 FHD 1080p |
60 Hz |
4:4:4 |
12 bit |
Note: The maximum supported resolution is 4K60 with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz.
The HD-TX-4KZ-111-1G does not support interlaced video.
|
|
Audio |
Input Signal Type |
DisplayPort over USB-C (DisplayPort Alt Mode) |
Output Signal Type |
DM Lite |
Digital Formats |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels |
Communications |
USB-C |
HDCP 2.3, EDID, CEC pass-through |
DM Lite |
HDCP 2.3, EDID pass-through |
Connectors |
USB IN |
(1) USB Type‑C® connector, female;
Digital video/audio input using DisplayPort Alt Mode4 |
DM LITE OUT |
(1) 8‑pin RJ‑45 yellow connector, female, shielded;
DM Lite output port for connection to a DM Lite receiver or DMPS Lite™ switcher1, 5 |
24V 0.75A |
(1) 2-pin 3.5 mm detachable terminal block;
24VDC power input;
Power pack sold separately, required only if the HD-TX-4KZ-111-1G is used with a wall plate receiver3 |
Ground |
(1) Chassis ground lug |
Controls and Indicators |
LINK |
(1) Green LED, indicates that a DM Lite link is established. |
PWR
|
(1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational. |
USB IN |
(1) Green LED, indicates that the device is receiving a DisplayPort over USB‑C (DisplayPort Alt Mode) input signal |
DM LITE OUT |
(2) LEDs on RJ‑45 connector.
Green indicates that a DM Lite link is established.
Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video. |
Power |
Power Pack |
Input: 100-240VAC
Output: 24VDC 0.75A
Model: PW-2407WUL (sold separately, required only if the HD-TX-4KZ-111-1G is used with a wall plate receiver)3 |
Environmental |
Temperature |
32° to 104°F (0° to 40°C) |
Humidity |
20% to 90% RH (non-condensing) |
Construction |
Composition |
Metal housing and bracket with black polycarbonate front label overlay |
Mounting |
Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included) |
Faceplate |
Requires a decorator style faceplate
(FP-G series, sold separately) |
Dimensions |
Height |
4.12 in. (105 mm) |
Width |
1.72 in. (44 mm) |
Depth |
2.19 in. (56 mm) |
Weight |
5.33 oz (152 g) |
Compliance |
Regulatory Model: M202045001
Intertek® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device
|
Maximum DM Lite Transmission Distance |