Master Photo: HD-TXU-4KZ-211-CHGR, Front Left
Add to Favorites

HD-TXU-4KZ-211-CHGR

DM® Essentials 4K60 4:4:4 Transmitter and 2x1 Auto-Switcher for HDMI®, USB-C® DisplayPort™, and USB 2.0 Signal Extension over CATx Cable with Device Charging

Interoperability with a DM® Essentials HD-RXU-4KZ Series receiver to provide point-to-point extension of an HDMI® or USB-C® DisplayPort™ signal and USB 2.0 signals over a CATx cable. Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3. Provides one HDMI input and one USB-C DisplayPort input with automatic switching capability. Charging capability provided by the USB-C DisplayPort input.

Have a question?
Add to a Project
Find a Dealer

The HD‑TXU‑4KZ‑211‑CHGR is a DM® Essentials 4K60 4:4:4 transmitter designed to interoperate with a DM Essentials HD‑RXU‑4KZ Series receiver. The paired transmitter and receiver enable extension of HDMI® or USB-C® DisplayPort™ AV signals along with USB 2.0 data. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or higher twisted pair cable (Crestron DM‑CBL‑8G or DM‑CBL‑ULTRA sold separately) must be used to connect the HD‑TXU‑4KZ‑211‑CHGR to the DM Essentials receiver.1

Interoperability with a DM Essentials HD-RXU-4KZ Series Receiver
For interoperability between the HD‑TXU‑4KZ‑211‑CHGR and an HD‑RXU‑4KZ Series receiver, the DM Essentials output port of the HD‑TXU‑4KZ‑211‑CHGR must be connected to the DM Essentials input port of the HD‑RXU‑4KZ Series receiver. 

NOTE: USB 2.0 data extension is not supported if the HD-TXU-4KZ-211-CHGR is paired with a DM Essentials receiver other than an HD-RXU-4KZ Series receiver, or paired with an HD-PS Series DMPS Essentials switcher. This model is not compatible with the HD‑RX‑4K‑210‑C‑E[‑POE].

Support for 5K Resolutions
The HD-TXU-4KZ-211-CHGR introduces support for 5K Ultra-Wide 5120 × 2160 and 5K Super-Wide 5120 × 1440 video resolutions, expanding the DM Essentials product family's compatibility with the latest generation of computers, monitors, and displays. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2

Integrated Web Server
The HD-TXU-4KZ-211-CHGR provides an integrated web server for device configuration and management. The web server also enables device, network, and other types of status information to be viewed.

Automatic Switching of Inputs
The web interface of the HD-TXU-4KZ-211-CHGR or control system programming can be used to configure AV switching behavior. Switching between the HDMI and USB-C DisplayPort inputs occurs based on the last connected input or on the routing priority assigned to each input. In addition, input selection push buttons on the front of the HD-TXU-4KZ-211-CHGR enable the desired input to be selected manually.

USB 2.0 Data Extension
Two USB 2.0 host ports and one USB 2.0 device port are provided on the HD‑TXU‑4KZ‑211-CHGR, enabling connection to a wide variety of supported USB 2.0 peripheral devices.3

USB-C DisplayPort Input with Charging Capability
The USB-C DisplayPort input can charge the connected AV source (for example, a laptop) with up to 60W of power.

Compact, Surface‑Mountable Design
Compact in design, the HD‑TXU‑4KZ‑211-CHGR can be mounted onto a flat surface such as the underside of a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD‑TXU‑4KZ‑211-CHGR receives power from the included power pack.4

 
Key Features
  • DM® Essentials transmitter functionality designed to interoperate with a DM Essentials HD-RXU-4KZ Series receiver
  • Point-to-point extension of an HDMI® or USB-C® DisplayPort™ signal and USB 2.0 data signals over a CAT5e or higher cable
  • Two inputs with automatic switching:
    • One HDMI input with associated USB 2.0 USB-C input
    • One USB-C input with DisplayPort Alt Mode capability, USB 2.0 support, and charging capability
  • DM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
  • 4K60 4:4:4 capability
  • HDR10, HDR10+, and Dolby Vision® video formats
  • Enterprise-grade security
  • Compliance with HDCP 2.3
  • Integrated web server for device configuration and management
  • Automatic display control using CEC (Consumer Electronics Control)
  • EDID management
  • Interoperability with a Crestron 3-Series® or later control system
  • XiO Cloud® service support
  • .AV Framework™ technology support
  • Compact, surface-mountable design
  • Power from 24VDC power pack (included)
  1. For DM Essentials connections, use Crestron DM‑CBL‑8G, Crestron DM‑CBL‑ULTRA, or third‑party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Cables are sold separately.
  2. For HDMI inputs, 4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.

    For USB-C DisplayPort inputs, 4K60 4:4:4 performance and HDR support require the use of USB 3.2 Gen 1 (5 Gbps) cables with support for DisplayPort Alt Mode (DisplayPort 1.4 video, 4K60 4:4:4, 2 lanes). Cables are sold separately.
  3. The HD-TXU-4KZ-211-CHGR is engineered to deliver maximum compatibility with the widest possible range of USB devices. Crestron does not guarantee that all USB devices are compatible with the HD-TXU-4KZ-211-CHGR.
  4. The HD-TXU-4KZ-211-CHGR is powered by the included power pack. The HD-TXU-4KZ-211-CHGR cannot receive power from a remote DM Essentials receiver.
  5. CBL-USB3G1-C-C-6 and CBL-USB3G2-C-C-3 cables are sold separately.
  6. The HDMI input requires an appropriate adapter or interface cable to accommodate a Dual‑Mode DisplayPort or DVI signal. CBL‑HD‑DVI interface cables are sold separately.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or contact us for additional information by visiting www.crestron.com/contact/our-locations for your local contact.

The original language version of this document is U.S. English.
All other languages are a translation of the original document.

This product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed online at patents.crestron.com.

Certain Crestron products contain open-source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, 3-Series, .AV Framework, DM, and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, Dolby Digital, and Dolby Vision are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Intertek is either a trademark or registered trademark of Intertek Group in the United States and/or other countries. USB Type-C and USB‑C are either trademarks or registered trademarks of USB Implementers Forum, Inc. in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2024 Crestron Electronics, Inc.

 
4K HDMI AVF Works With (2) HDCP 2.3
Video
Input Signal Types HDMI® (DVI and Dual-Mode DisplayPort™ interface compatible4) and DisplayPort over USB-C® (DisplayPort Alt Mode) with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support2
Output Signal Type DM® Essentials with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support2
Copy Protection HDCP 2.3
Resolutions Common resolutions are listed in the following table.
Scan Type Resolution Frame Rate Color Sampling Color Depth
Progressive 5120×2160 5K Ultra-Wide 30 Hz 4:4:4 8 bit
5120×2160 5K Ultra-Wide 60 Hz 4:2:0 8 bit
5120×1440 5K Super-Wide 60 Hz 4:4:4 8 bit
4096x2160 DCI 4K and 3840x2160 4K UHD 24 Hz 4:4:4 12 bit
30 Hz 4:4:4 12 bit
60 Hz 4:2:2 12 bit
60 Hz 4:4:4 8 bit
2560x1600 WQXGA 60 Hz 4:4:4 8 bit
1920x1080 FHD 1080p 60 Hz 4:4:4 12 bit
Interlaced (HDMI input only) 1920x1080 HD 1080i 30 Hz 4:4:4 12 bit
Notes: The maximum supported resolution is 4K60 with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz.

The USB-C DisplayPort input does not support interlaced video.
Audio
Input Signal Types HDMI, DisplayPort over USB-C (DisplayPort Alt Mode)
Output Signal Type DM Essentials
Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
Communications
HDMI HDCP 2.3, EDID, CEC
USB‑C HDCP 2.3, EDID, CEC;
USB 2.0 up to 300 Mbps
USB USB signal extension via USB 2.0 host and device ports
DM Essentials HDCP 2.3, EDID;
USB 2.0 up to 300 Mbps
Ethernet 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, Web browser setup and control, Crestron control system integration, IEEE 802.1X, Secure CIP, Authentication, SSH/SSL, TLS
Connectors
SERVICE (1) USB 2.0 Type-A connector, female;
Used for firmware loading and configuration management;
Can also provide up to 5V 500 mA power to a USB powered device
24V 4.5A (1) 2.1 x 5.5 mm DC power connector;
24VDC power input;
PW-2475DU power pack included4
60W USB, INPUT 1 (1) USB Type-C® connector, female;
Digital video/audio input using DisplayPort Alt Mode;
USB 2.0 data support;
Can also charge connected AV source with up to 60W of power5
HDMI, INPUT 2 (1) HDMI Type A connector, female;
HDMI digital video/audio input;
DVI and Dual-Mode DisplayPort interface compatible6
DEVICE, INPUT 2 (1) USB Type‑C® connector, female;
USB 2.0 device port associated with HDMI input for AV sources that require USB 2.0 support;
USB signal extender port for connection to a computer or other USB 2.0 host3
HOST (2) USB Type-A connectors, female;
USB 2.0 host ports;
USB signal extender ports for connection to USB mice, keyboards, or other USB 2.0 devices;3
Available Power: 500 mA @ 5VDC per port
DM OUT (1) 8‑pin RJ‑45 yellow connector, female, shielded;
DM Essentials output port for connection to a DM Essentials HD-RXU-4KZ Series receiver1
LAN (1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port for device configuration and management
Ground (1) Chassis ground lug
Controls and Indicators
PWR (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.
AUTO (1) Push button for enabling or disabling automatic switching of inputs;
(1) LED, green indicates that automatic switching of inputs is enabled
SETUP (1) Push button for Ethernet setup;
(1) LED, red indicates that the SETUP push button is pressed
INPUT 1 (1) Push button for manual selection of USB-C DisplayPort input;
(1) LED, green indicates that the USB-C DisplayPort input is routed to an output, and amber indicates that a source is detected but is not routed to an output
INPUT 2 (1) Push button for manual selection of HDMI input;
(1) LED, green indicates that the HDMI input is routed to an output, and amber indicates that a source is detected but is not routed to an output
DM OUT (2) LEDs on RJ‑45 connector.
Green indicates that a DM Essentials link is established;
Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video
LAN

(2) LEDs on RJ‑45 connector;
Green indicates that a 100 Mbps link is established;
Solid amber indicates that a 1000 Mbps link is established;
Flashing amber indicates 1000 Mbps Ethernet activity.
Power
Power Pack
(Included)		 Input: 100-240VAC
Output: 24VDC 7.5A
Model: PW-2475DU4
Environmental
Temperature 32° to 104°F (0° to 40°C)
Humidity 20% to 90% RH (non-condensing)
Enclosure
Chassis Metal, black finish, vented top, front, rear, and sides, 2 mounting brackets included
Mounting Freestanding, surface mountable, or attachment to a single rack rail
Dimensions
Height 1.20 in. (30 mm)
Width 8.52 in. (216 mm)
Depth 6.48 in. (165 mm)
Weight
1.96 lb (0.89 kg)
Compliance
Regulatory Model: M202047007

Intertek® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device
Maximum DM Essentials Transmission Distance
Resolution Frame Rate (Hz) Color Sampling Color Depth Cable Type1
DM-CBL-ULTRA DM® Ultra Cable DM-CBL-8G DM 8G® Cable or CAT5e (UTP) or Higher
1920x1080 HD 1080i 30 4:4:4 12 bit 230 ft (70 m) 195 ft (60 m)
1920x1080 FHD 1080p 60 4:4:4 8, 12 bit
1600x1200 UXGA 60 4:4:4 8, 12 bit
2048x1080 DCI 2K 60 4:4:4 8, 12 bit
1920x1200 WUXGA 60 4:4:4 8, 12 bit
2048x1152 QWXGA 60 4:4:4 8, 12 bit
2560x1080 UWFHD 60 4:4:4 8 bit
2560x1440 WQHD Reduced Blanking 60 4:4:4 8 bit
2560x1600 WQXGA Reduced Blanking 60 4:4:4 8 bit
2048x1152 QWXGA 60 4:4:4 12 bit
3840x2160 4K UHD and 4096x2160 DCI 4K 30 4:2:2 12 bit
30 4:4:4 8 bit
60 4:2:0 8 bit
3840x2160 4K UHD and 4096x2160 DCI 4K 30 4:4:4 12 bit 130 ft (40 m) 100 ft (30 m)
60 4:2:0 12 bit
60 4:2:2 12 bit
60 4:4:4 8 bit
Click here to search product certificates.
  1. For DM Essentials connections, use Crestron DM‑CBL‑8G, Crestron DM‑CBL‑ULTRA, or third‑party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Cables are sold separately.
  2. For HDMI inputs, 4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.

    For USB-C DisplayPort inputs, 4K60 4:4:4 performance and HDR support require the use of USB 3.2 Gen 1 (5 Gbps) cables with support for DisplayPort Alt Mode (DisplayPort 1.4 video, 4K60 4:4:4, 2 lanes). Cables are sold separately.
  3. The HD-TXU-4KZ-211-CHGR is engineered to deliver maximum compatibility with the widest possible range of USB devices. Crestron does not guarantee that all USB devices are compatible with the HD-TXU-4KZ-211-CHGR.
  4. The HD-TXU-4KZ-211-CHGR is powered by the included power pack. The HD-TXU-4KZ-211-CHGR cannot receive power from a remote DM Essentials receiver.
  5. CBL-USB3G1-C-C-6 and CBL-USB3G2-C-C-3 cables are sold separately.
  6. The HDMI input requires an appropriate adapter or interface cable to accommodate a Dual‑Mode DisplayPort or DVI signal. CBL‑HD‑DVI interface cables are sold separately.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or contact us for additional information by visiting www.crestron.com/contact/our-locations for your local contact.

The original language version of this document is U.S. English.
All other languages are a translation of the original document.

This product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed online at patents.crestron.com.

Certain Crestron products contain open-source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, 3-Series, .AV Framework, DM, and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, Dolby Digital, and Dolby Vision are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Intertek is either a trademark or registered trademark of Intertek Group in the United States and/or other countries. USB Type-C and USB‑C are either trademarks or registered trademarks of USB Implementers Forum, Inc. in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2024 Crestron Electronics, Inc.

Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.
mgctlbxN$MZP mgctlbxV$5.2.4 mgctlbxL$C