Sound Bar for Crestron RL® 2, Black
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
For a substitute, please see SAROS SB-200-P.
A stereo sound bar designed to provide enhanced audio performance for a flat panel display. Designed for use with the Crestron RL® 2 Group Collaboration System.
The CCS-SPK-SB-100 is a stereo sound bar designed to provide enhanced audio performance for a flat panel display. Its full-range, front-firing speakers offer a dramatic improvement over the small, rear-facing speakers typical of many display devices. Brackets included with the sound bar allow for attachment to a wall surface or placement on a shelf below or above the display. Built-in amplification allows for direct connection to the line-level audio output of the display device, or to the output of a separate audio preamp, switcher, mixer, tv tuner, or codec.[1]
The CCS-SPK-SB-100 sound bar is ideally suited for use with the Crestron RL® 2 Group Collaboration System and other unified communication and videoconferencing systems. It is equally well-suited for use in any small to medium sized room or public space in a hotel, restaurant, museum, medical center, airport, office building, or residence.
Key Features
- High-quality, full-range amplified stereo sound bar
- Designed for use with the Crestron RL® 2 Group Collaboration System
- Delivers enhanced sound quality and performance for use with any flat panel display
- Mounts to a wall or sits on a shelf
- Unbalanced stereo line-level audio input [1]
- 100 to 240 Volt AC powered
| Features & Performance |
| |
Woofers |
(2) 3 inch (76 mm) ported |
| |
Tweeters |
(2) 1 inch (25 mm) dome |
| |
Amplifier Power |
25 Watts per channel, stereo |
| |
Frequency Response |
70 Hz to 20 kHz (±3 dB) |
| |
Maximum SPL |
85 dB @ 1W/1m |
| |
Input Sensitivity |
1 Vrms for rated output |
| Connections |
| |
AUDIO IN, L/R |
(2) RCA female;
Unbalanced stereo line-level audio input [1];
Maximum Input Level: 2 Vrms;
Input Impedance: 10k Ohms |
| |
100-240V~50/60Hz |
(1)Attached 6 ft (˜2 m) power cord |
| Controls |
| |
POWER |
(1) Rocker switch, turns main power on or off |
| Power Requirements |
| |
Main Power |
0.3 Amps maximum @ 100-240 Volts AC, 50/60 Hz |
| Environmental |
| |
Temperature |
41° to 104° F (5° to 40° C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| Construction |
| |
Enclosure |
Plastic housing with cloth covered grille |
| |
Mounting |
Freestanding or wall mount (brackets included) |
| Dimensions |
| |
Height |
3.50 in (89 mm);
3.90 in (99 mm) with shelf placement brackets |
| |
Width |
39.00 in (991 mm) |
| |
Depth |
3.19 in (81 mm);
3.40 in (87 mm) with wall mount brackets |
| Weight |
| |
10.0 lb (4.6 kg) |
s
Click
here to search product certificates.
Specifier Resources
Guides & Manuals
Spec Sheets
Technical Resources
Crestron Smart Graphics RL Sample Project Example Programs
This program demonstrates programming Smart Graphics while interacting with Crestron RL and local room controls. The devices controlled in this program are the Crestron CLW-DIMEX, CSM-QMT50, CSC-DCEX, CHV-THSTATEX, Crestron RL, and the Vaddio ClearView HD Camera.Features========- Lighting control- Shade control- Climate control- Crestron RL control- Camera control
