High Power Dual-Band Wireless Access Point
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
Provides a wireless access point with exceptional Wi-Fi® performance for use with Crestron® touch screens, remotes, computers, mobile devices, and other equipment. Supports 802.11 a, b, g, and n devices.
The CEN-WAP-1500 Wireless Access Point provides exceptional Wi-Fi® performance for use with Crestron® touch screens, remotes, computers, mobile devices, and other equipment. High output power combined with concurrent dual-band 3x3 MIMO technology delivers superior wireless range and maximum data rates for demanding residential and commercial applications. The CEN-WAP-1500 supports 802.11 a, b, g, and n devices. Internal high-performance antennas achieve extended omnidirectional coverage for easy placement in virtually any indoor environment. Its low-profile design and versatile installation options afford an unobtrusive appearance, whether placed on a shelf or mounted to a wall or ceiling. The included PoE injector streamlines wiring to the wireless access point location, carrying both power and data over a single Ethernet cable.[1]
Key Features
- High output power for broader coverage
- Concurrent dual-band (2.4 GHz & 5 GHz) technology
- 802.11 a, b, g, and n support
- Data transfer rates of up to 900 Mbps[2]
- VLAN support for creating a secure guest network
- QoS support for prioritizing network traffic
- Support for up to 8 SSIDs
- Web browser based management
- System logging capability
- One-wire installation using included PoE injector[1]
- Low-profile housing
- Shelf, wall, or ceiling mount installation
| Wireless |
| | Protocols | IEEE 802.11a/b/g/n Wi-Fi® |
| | Frequency Bands | Concurrent 2.4 GHz and 5 GHz (5.15-5.25 GHZ or 5.8 GHz) |
| | Speed [2] | Up to 900 Mbps (450 Mbps @ 2.4 GHz, 450 Mbps @ 5 GHz) |
| | Transmit Power | 600 mW |
| | Security | 64 & 128-bit WEP, WPA™, WPA2™, WPA-PSK, WPA2-PSK |
| Wired |
| | 10/100/1000 Mbps Gigabit Ethernet [3] |
| Connectors – Wireless Access Point |
| | PoE | (1) 8-wire RJ45, female;
10Base-T/100Base-TX/1000Base-T Ethernet and PoE PD (Powered Device) port [1];
Connects to the DATA & PWR OUT port of the supplied PoE injector [1];
Maximum Cable Length: 330 ft (100 m) total to network switch port with PoE injector inserted at any point in line [3] |
| | LAN | (1) 8-wire RJ45, female;
10Base-T/100Base-TX/1000Base-T Ethernet port;
Provides a LAN port for a wired Ethernet device (does not supply PoE) |
| Connectors – PoE Injector |
| | DATA IN | (1) 8-wire RJ45, female;
Ethernet pass-thru port;
Connects to the LAN via CAT5e or CAT6 Ethernet cable [3] |
| | DATA & PWR OUT | (1) 8-wire RJ45, female;
Ethernet pass-thru and PoE PSE port;
Connects to the PoE port of the Wireless Access Point |
| | Power Input | Main power inlet;
Mates with detachable power cord, included |
| Controls & Indicators – Wireless Access Point |
| | Reset | (1) Pushbutton, resets the device |
| | Power | (1) LED, indicates operating power is supplied via the PoE injector |
| | 2.4GHz | (1) LED, indicates the configuration and broadcasting of a 2.4 GHz network |
| | 5GHz | (1) LED, indicates the configuration and broadcasting of a 5 GHz network |
| | PoE Port | (2) LEDs, indicate Ethernet speed and activity |
| | LAN Port | (2) LEDs, indicate Ethernet speed and activity |
| Controls & Indicators – PoE Injector |
| | PoE | (1) LED, indicated power is being delivered to the Wireless Access Point |
| | PWR | (1) LED, indicates operating power is supplied via the Power Input |
| Power Requirements |
| | Wireless Access Point | 1.25 Amps @ 48 Volts DC supplied by PoE injector (included);
Must be powered by the PoE injector supplied; not compatible with any other PoE injector or PSE [1] |
| | PoE Injector (included) | 0.3 Amp @ 100-240 Volts AC, 50/60 Hz |
| Environmental |
| | Temperature | 32° to 113°F (0° to 45°C) |
| | Humidity | 10% to 90% RH (non-condensing) |
| | Heat Dissipation | 85 BTU/hr |
| Construction |
| | Chassis | Plastic |
| | Mounting | Freestanding or mounts to a wall or ceiling (mounting bracket and rubber foot pads included) |
| Dimensions |
| | Diameter | 7.88 in (200 mm) |
| | Height | 1.58 in (40 mm) |
| Weight |
| | 1.0 lb (0.46 kg) |
Click
here to search product certificates.
