DigitalMedia™ D Cable, non-plenum, 500 ft spool
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
Provides a DigitalMedia upgrade path for existing systems using QuickMedia or CresCAT cabling, and enables wiring for DigitalMedia through smaller conduits.
Crestron DM-CBL-D-NP is a special "D-only" version of our standard DigitalMedia Cable (DM-CBL-NP). It is designed to afford a DigitalMedia upgrade path for existing systems by converting QuickMedia™ (QM) or Crestron Home® CAT5 Balanced AV (CH) wiring to handle DigitalMedia (DM) signals. It also allows wiring for DM to fit in a 3/4 inch conduit by running one DM-CBL-D-NP along with one CAT5e and one piece of Cresnet® control cable (CRESNET-NP).
A QM system is typically wired using CRESCAT-QM-NP QuickMedia Cable, while a CH system commonly uses CRESCAT-NP Crestron Home CAT5 AV Cable. Either of these cable types is perfectly suited for handling the "M" and "DMNet" portions of a DM signal. All that's missing is the high-bandwidth/low-crosstalk "D" cable, which is easily added by installing a single piece of DM-CBL-D-NP alongside the existing cable, forming the equivalent of a single run of standard DigitalMedia Cable.[1]
Refer to the DM-CBL-NP specification for complete information about standard DigitalMedia Cable.
For plenum applications, use DM-CBL-D-P.
| Construction |
| |
Four twisted pair, each pair isolated by an internal spline within an inner jacket, shield, braid, and overall jacket |
| (4) Twisted Pairs |
| |
Colors |
Blue/white, orange/white, green/white, brown/white |
| |
Conductors |
24 AWG x8 solid copper |
| |
Insulation |
0.0055 inch thick HDPE |
| |
Outer Diameter (per conductor) |
1.028 ±0.02 mm |
| |
Shield |
Aluminum/Mylar tape w/aluminum on the outside |
| |
Braid |
Tin/copper (45% coverage) |
| |
Mutual Capacitance |
5600 pF / 100 m |
| |
Capacitance Unbalance |
330 pF / 100 m |
| |
Characteristic Impedance |
100 ohms ±15% (1-250 MHz) |
| Inner Jacket |
| |
Color |
Natural |
| |
Material |
PVC |
| |
Thickness |
0.015 inch |
| Outer Jacket |
| |
Color |
Blue |
| |
Material |
PVC |
| |
Thickness |
0.018 inch |
| |
Outer Diameter |
0.3 inch (7.62 mm) nominal |
| |
Minimum Recommended Bend Radius |
3.5 inches |
| |
Maximum Pull Tension |
28 lbf |
| Rating |
| |
NEC Article 800; UL Subject 444, Type CM; CSA Type CMG |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.
