Somfy® Shade Controller, 2 digital outputs for Somfy ILT motors
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
The C2N-SSC-2 Somfy Shade Controller is a compact Cresnet device designed to provide a bidirectional serial interface for up to two Somfy ILT[1] Intelligent Shade Motors. Window treatments equipped with the Somfy ILT motor offer enhanced capability compared to typical three-wire models.
The C2N-SSC-2 Somfy® Shade Controller is a compact Cresnet® device designed to provide a bidirectional serial interface for up to two Somfy ILT[1] Intelligent Shade Motors. Window treatments equipped with the Somfy ILT motor offer enhanced capability compared to typical three-wire models.
In addition to basic open/close commands, the C2N-SSC-2 allows for setting each shade to a specific position and polling for its current position with 16-bit precision. Feedback signals provide confirmation of each motor's activity to enable precise, predictable control, even from a remote location. Limit adjustments are set electronically using buttons provided on the face of the unit, and up to 20 presets for each output can be saved onboard the C2N-SSC-2 for easy recall through the control system. The C2N-SSC-2 mounts discreetly to any flat surface and requires a simple Cresnet connection to the control system.
| Connectors |
| |
1 - 2 |
(2) 4-position, 4-conductor RJ11 female;
Intelligent Shade Motor control ports;
Each port provides proprietary serial control of (1) Somfy ILT[1] shade motor;
Maximum Cable Length: 50 ft (15 m) |
| |
NET |
(1) 4-pin 5mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network |
| Buttons |
| |
UP LIMIT (1 – 2) |
(2) buttons select up limit adjust mode for either motor |
| |
DWN LIMIT (1 – 2) |
(2) buttons select down limit adjust mode for either motor |
| |
∧ |
(1) button moves selected shade up while in limit adjust mode |
| |
∨ |
(1) button moves selected shade down while in limit adjust mode |
| |
SETUP |
(1) button used for touch-settable ID (TSID) |
| LED Indicators |
| |
PWR |
(green) Indicates DC power supplied from Cresnet network |
| |
NET |
(yellow) Indicates communication with the Cresnet system |
| |
SETUP |
(red) For touch-settable ID (TSID), updating firmware, and setting limits |
| Power Requirements |
| |
Cresnet Power Usage |
1.0 Watt (0.04 Amps @ 24 Volts DC) |
| Environmental |
| |
Temperature |
41° to 122°F (5° to 50°C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| Enclosure |
| |
Black metal, surface mount box with (2) integral mounting flanges |
| Dimensions |
| |
Height |
0.94 in (23.9 mm) |
| |
Width |
2.14 in (54.4 mm) |
| |
Depth |
3.83 in (97.3 mm) |
| Weight |
| |
0.25 lb (0.11 kg) |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.
