Master photo:CLS-C6MRF
Add to Favorites

CLS-C6MRFA

iLux® Integrated Lighting System w/Motion Detector & infiNET™, Almond

Discontinued

This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

 

  • Wall-mount integrated lighting and shade control system
  • 6 channels of dimming or switching
  • 6 groups of shade and drape control

Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

 

Have a question?
Add to a Project
Find a Dealer

The iLux® CLS-C6MRF is a complete, integrated lighting system designed for wall-mount installation in boardrooms, auditoriums, home theaters, or anywhere versatile and cost-effective lighting and shade control is required. Combining the Crestron® reputation for innovation and reliability with high-quality integrated dimming, native shade control, and extensive customization and integration, the iLux is the ideal choice for all types of room lighting and shade control applications.

6 Channels of Dimming

The CLS-C6MRF features six channels of dimming for LED, incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire dimmable fluorescent loads. On and off switching of many non-dimmable lighting loads is also possible. Each channel will handle up to 800 Watts individually, with a total rating of 1920 Watts. Larger loads and additional load types can also be supported using Crestron CLS-EXP Series expansion modules.

6 Groups of Shade Control

Using Crestron's networked Shade and Drape Controllers, the CLS-C6MRF enables versatile control of a roomful of motorized window treatments, screens, and lifts in up to six shade groups.

Versatile Front Panel Controls

The deceptively clean front panel actually affords an extensive amount of control and customization to suit each unique room application. Large ON and OFF buttons provide instant access to the "On" and "All Off" scenes, while the six main buttons can be set up to recall additional scene presets, adjust shades, or perform a host of other functions. The buttons' "rocker" action enables intuitive, tactile control for adjusting lighting levels and shade positions. An additional "Up/Down" button is configurable for a variety of functions, including for use as a master lighting or shade control or as a "shift" button to expand the capabilities of the six main buttons.

With each new scene selection, window shades reposition and lights fade elegantly to their new settings. The selected scene is indicated by a white LED located beside each button, and the customizable label strip allows each button to be clearly labeled using Crestron Engraver software or standard 3/8" tape labels. Dimming levels and shade positions are displayed on six green LEDs with bar graph logic, accessible behind the flip-up front cover. Additional controls and a numeric display hidden beneath the cover enable setup without requiring a PC. Enhanced customization is provided via the PC programming port using iLux Designer software.

Built-in Motion Detector

The CLS-C6MRF features a built-in infrared motion detector, enabling automated control based on room occupancy. Lights can be programmed to automatically turn on or off and shades to open or close based on room occupancy.

Multipoint Keypad Control

Up to 16 Crestron keypads may be connected to a single CLS-C6MRF, providing versatile multipoint control for rooms with multiple entrances or work areas.

Multi-Unit Expansion

One CLS-C6MRF master will support up to eight additional CLS-C6 or CLS-C6M units, enabling systems of up to 54 lighting zones and 54 shade groups. Commands for typical functions such as scene recall, scene off, master dimming, and those based on occupancy status are shared between the CLS-C6MRF and CLS-C6(M) units. Each individual unit can still support a complete assortment of local devices including keypads and shade controllers.

Control System Integration via infiNET™

The CLS-C6MRF employs Crestron's infiNET technology to enable a wireless link to a 2-Series control system. A single C2N-MNETGW gateway connected to the control system enables 2-way wireless communications between the iLux system and the central control system, allowing the iLux's functions to be controlled from touch screens, RF wireless remotes, and even computers. The control system interface also enables extensive flexibility for integration with other systems such as security, HVAC, and energy management.

Several infiNET-based iLux systems can coexist on one infiNET wireless network along with other infiNET dimmers, switches, and thermostats. For a solution using a wired Cresnet® connection instead of infiNET, use the CLS-C6M.

 
Key Features
  • Wall-mount integrated lighting and shade control system
  • 6 channels of dimming or switching
  • 6 groups of shade and drape control
  • Linkable for up to 54 lighting channels and 54 shade groups
  • Up to 16 user-settable scenes
  • 7 configurable "rocker" buttons with customizable label strip
  • Setup controls and programming port hidden under flip-up front cover
  • 6 LEDs with bar graph logic that represent lighting levels and shade positions
  • Easy setup from front panel or iLux Designer software
  • Built-in motion detector
  • Optional IR remote
  • Optional multipoint control using up to 16 keypads
  • Master air-gap relay
  • 2-Series Control System integration via infiNET™ RF wireless technology
  • Energy-saving ASHRAE 90.1/LEED compliant
  • Available in almond, black, or white
  • CEC Title 24 2013 Compliant
  1. Captive screw terminals accept up to two 22 to 12 AWG (0.34 to 4.0 mm2) wires per terminal.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

 

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

 

Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

 

Crestron, the Crestron logo, Cresnet, infiNET, and iLux are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc

 
Load Ratings
  Dimmer Channels 6
  Maximum Per Channel 800 Watts/VA (6.6 Amps at 120 Volts AC), expandable via Expansion Modules (sold separately)
  Minimum Per Channel 15 Watts/VA (0.125 Amps at 120 Volts AC)
  Module Total 1920 Watts/VA (16 Amps at 120 Volts AC)
  Dim Load Types LED, incandescent, magnetic low-voltage, neon/cold cathode, 2-wire dimmable fluorescent ballast
  Switch Load Types Electronic low-voltage, 3- and 4-wire fluorescent ballast, high-inrush switching;
277 Volt switching available via CLS-EXP Series expansion modules
Power Requirements
  100 to 127 Volts AC, 50/60Hz, line power
Connections
  LOCAL DEVICES (1) 4-pin 5mm detachable terminal block;
Cresnet® Master port for local devices including:
  • C2N-DB and CNX-B Series keypads, 16 maximum;
  • C2N-SSC-2, C2N-SDC, and C2N-SDC-DC shade controllers; 16 maximum;
  • Additional CLS-C6M or CLS-C6 units, 8 maximum;
  • Additional CNPWS-75 or other Cresnet power supply required beyond 4 devices; C2N-SDC-DC always requires an additional power supply
  HOT (1) Captive screw terminal,[1] line power input
  LOAD1 – LOAD6 (6) Captive screw terminals,[1] dimmer channel outputs 1 – 6
  NEUTRAL (1) Captive screw terminal,[1] neutral input
  GROUND (1) Captive screw terminal,[1] ground
  PC (Front) (1) 3.5 mm TRS mini-phone jack, RS-232 programming port
Controls
  Buttons 1 – 6 (6) 3-position rocker switches, configurable to recall individual scenes, to control shades, or for master lighting or shade control;
“Scene mastering” option enables manual dimming utilizing rocker button action, also used to adjust lighting levels when in “Lighting” mode and shade positions when in “Shades” mode;
Additional functionality configurable via software
  Up/Down Button (1) 3-position rocker switch, configurable for master lighting or shade control or as a “shift” for buttons 1-6;
Additional functionality configurable via software
  ON (1) Pushbutton, recalls “On” scene
  OFF (1) Pushbutton, turns all lights off
  LIGHTS, SHADES (2) Pushbuttons, select “Lights” or “Shades” modes
  SAVE, CANCEL, ∧, ∨ (4) Pushbuttons, navigate and execute setup functions
  Reset (1) Recessed miniature pushbutton, executes hardware reset
  Dimming Ramp Rate 5 seconds (default), software adjustable 1 to 10 seconds
  Scene Fade Time 2 seconds (default), software adjustable 0 seconds to 99 minutes
LED Indicators
  Scenes (6) White LEDs, one per each “Scene” button
  High/Low (2) White LEDs, indicate “Shift” status
  ON (1) White LED, indicates “On” Scene is selected
  LIGHTS, SHADES (2) Green LEDs, indicate “Lights” or “Shades” mode is active
  SAVE, CANCEL (2) Green LEDs, correspond with “Save” and “Cancel” buttons
  MIN, SEC (2) Green LEDs, indicate display of “Minutes” or “Seconds”
  1 – 6 ((6) Green LEDs with bar graph logic, indicate lighting levels and shade positions
  Numeric Display ((2) 8-segment digits, indicate modes and setup values
IR Receiver
  Reception Frequency 36 kHz
  Requires CLS-IRHT8 IR remote
Motion Detector
  Type Infrared
  Range 20 to 30 feet at 4 foot elevation
RF Wireless
  RF Transceiver 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), IEEE 802.15.4 compliant
  Range (typical) 150 feet indoor, 250 feet outdoor;
Subject to site-specific conditions;
Range is increased by adding additional devices or C2N-MNETRPT repeater
  Gateway Requires a C2N-MNETGW RF gateway
Environmental
  Temperature 32° to 104° F (0° to 40° C)
  Humidity 10% to 90% RH (non-condensing)
Enclosure
  Mounts in a 4-gang electrical box, 3-1/2" deep minimum
Dimensions
  Height 4.48 in (114 mm)
  Width 8.89 in (226 mm)
  Depth 2.60 in (66 mm)
Weight
  1.43 lb (0.65 kg)
Standards & Certifications
  CEC Title 24 2013 Compliant
Click here to search product certificates.
  1. Captive screw terminals accept up to two 22 to 12 AWG (0.34 to 4.0 mm2) wires per terminal.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

 

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

 

Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

 

Crestron, the Crestron logo, Cresnet, infiNET, and iLux are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc

Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.
mgctlbxN$MZP mgctlbxV$5.2.4 mgctlbxL$C