Interface Module for TPMC-V Touchpanels
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
Provides a streamlined connection for TPMC-V Series V-Panel Integrated Touchpanels. Mounts in a single-gang wall box, or to any flat surface using its included bracket. Includes inserts to match black or white decorator style faceplates.
The TPMC-V-IMCW is the interface module that is included with the TPMC-V12 and TPMC-V15 V-Panel™ Integrated Touchpanels. It provides a convenient pluggable connection on its front panel utilizing a modular VIDEO/LAN jack paired with a 4-pin NET port. On the rear are connections for Cresnet®, Ethernet, balanced or unbalanced video, and a choice of Cresnet or local DC power. An additional DC power jack is included on the front panel to simplify the connection of a local power supply in a typical wall mount application.
Using the hardware provided, the TPMC-V-IMCW can be mounted in a 1-gang electrical box, to a flat surface, or to a 19-inch rack-rail. Multiple TPMC-V-IMCW interface modules may be purchased individually and installed as part of a complete system to provide multiple touchpanel connection locations.
Key Features
- Provides simplified connection for the V-Panel™ Integrated Touchpanels
- Mounts in a single-gang wall box or mud ring
- Includes inserts to match black or white faceplates
- Surface mount and rack-rail installation options included
- Wired Ethernet and Cresnet control system connections
- Balanced or coaxial video input
- Versatile wiring and powering options
| Connectors & Indicators – Front Panel |
| | TO PANEL – VIDEO/LAN | (1) shielded 10P8C modular jack (RJ45 or RJ50 compatible);
Connects to a TPMC-V Series Touchpanel via TPMC-V-CBL-S, CRESCAT, CRESCAT-D-HP, CRESCAT-QM, DM-CBL, or generic CAT5e/6 cable[1] |
| | TO PANEL – NET | (1) 4-pin 3.5mm detachable terminal block;
Connects to a TPMC-V Series Touchpanel via TPMC-V-CBL-S, CRESCAT, CRESCAT-D-HP, CRESCAT-QM, DM-CBL, CRESNET, or CRESNET-HP cable[1] |
| | PWR | (1) green LED, indicates DC power supplied from Cresnet network or DC power pack |
| | 24VDC 2A | (1) 2.1mm barrel DC power jack;
24 Volt DC power input;
PW-2420RU power pack sold separately |
| Connectors – Rear Panel |
| | 24VDC 2A | (1) 2.1mm barrel DC power jack;
24 Volt DC power input;
PW-2420RU power pack sold separately |
| | NET | (1) 4-pin 3.5mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network |
| | BAL VIDEO INPUT | (1) 3-pin 3.5mm detachable terminal block;
Balanced composite video input;
Input Impedance: 100 ohms nominal;
Input Level: 1 Vp-p nominal, 1.5 Vp-p maximum;
Maximum DC Offset: ±2 Volts;
Connects to any Crestron CAT5 Video Out port via CresCAT cable |
| | UNBL VIDEO INPUT | (1) 2-pin 3.5mm detachable terminal block;
Unbalanced composite video input;
Input Impedance: 75 ohm nominal;
Input Level: 1 Vp-p nominal, 1.5 Vp-p maximum;
Maximum DC Offset: ±2 Volts;
Connects to any conventional coax video source;
Note: Balanced and unbalanced video inputs are mutually exclusive |
| | LAN | 10P8C modular jack (RJ45 compatible) |
| | Ground | (1) Flying lead, grounding wire |
| Power Requirements |
| | Cresnet Power Usage | 0.5 Watt (0.02 Amps @ 24 Volts DC), module only;
43 Watts (1.8 Amps @ 24 Volts DC) with TPMC-V12 connected;
45 Watts (1.9 Amps @ 24 Volts DC) with TPMC-V15 connected |
| | Power Pack | 2 Amps @ 24 Volts DC, PW-2420RU power pack sold separately |
| | Note: May be powered by Power Pack or Cresnet network power, not both. |
| Environmental |
| | Temperature | 32° to 112°F (0° to 45°C) |
| | Humidity | 10% to 90% RH (non-condensing) |
| | Heat Dissipation | 147 BTU/Hr with TPMC-V12 connected;
154 BTU/Hr with TPMC-V15 connected |
| Enclosure |
| | Construction | Metal, black finish, includes (2) metal inserts to allow choice of black or white front panel |
| | Flush Wall Mount | 1-gang mountable in a standard electrical box (2.5 inch deep minimum); requires decorator style faceplate (not included) |
| | Surface Mount | Surface mount bracket included |
| | Rack Mount | Mountable to a single 19-inch EIA rack rail |
| Dimensions |
| | Height | 4.12 in (105 mm) |
| | Width | 1.72 in (44 mm);
1.93 in (49 mm) w/surface mount bracket |
| | Depth | 1.59 in (41 mm) |
| Weight |
| | 5.7 oz (161 g), 8.3 oz (235 g) with bracket |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.
