infiNET™ Wireless Expander
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
Provides a simple solution for extending wireless range and filling in dead zones in an infiNET wireless network.
The C2N-MNETRPT is a 2-way RF wireless expander designed to extend the coverage of an infiNET™ wireless network. Requiring only an AC power source, the C2N-MNETRPT can be installed where needed to fill a "dead" space between two or more infiNET devices.
Crestron® infiNET wireless technology provides reliable 2-way communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET device on the network (including the C2N-MNETRPT) functions as an expander, passing command signals through to every other device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption. Each infiNET device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths.[1]
Setting up a complete infiNET network is simple, utilizing dynamic discovery to locate and acquire each device and expander automatically.
Key Features
- infiNET™ mesh network technology
- Extends wireless range up to 150 feet (46 m) indoors
- Automatic discovery for fast, easy setup
- Wi-Fi friendly channel assignment
| Wireless |
| |
RF Transceiver |
infiNET™ 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), IEEE 802.15.4 compliant |
| |
Range (typical) |
150 feet (46 m) indoor, 250 feet (76 m) outdoor to nearest mesh network device(s), subject to site-specific conditions |
| |
Gateway |
Requires a C2N-MNETGW infiNET gateway |
| Controls & Indicators |
| |
PWR |
(1) green LED, indicates operating power supplied from power pack |
| |
MNET |
(1) yellow LED, indicates communication with the infiNET network |
| |
SETUP |
(1) Recessed pushbutton with red LED, used to link the repeater to a gateway |
| Connectors |
| |
COM |
(1) 6-pin RJ11 female;
RS-232 PC console port |
| |
PWR |
(1) 2.5 x 5.5 mm DC power connector;
12 Volt DC power input, power pack included |
| Power Requirements |
| |
Power Pack
(US/North America) |
0.5 Amps @ 12 Volts DC;
120 Volts AC, 60 Hz power pack, model PW-1205 included |
| |
Power Pack
(International) |
1.5 Amps @ 12 Volts DC;
230 Volts AC, 50 Hz power pack, model PWI-1215 included |
| Enclosure |
| |
Metal with black finish, freestanding or surface mount |
| Environmental |
| |
Temperature |
32° to 104°F (0° to 40°C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| Dimensions |
| |
(Without antenna) |
| |
Height |
1.24 in (32 mm) |
| |
Width |
2.47 in (63 mm) |
| |
Depth |
3.88 in (99 mm) |
| Weight |
| |
8.3 oz (240 g) |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.
