Shade and Drape Controller, 2 outputs for 120 VAC 3-wire bidirectional motors
The C2N-SDC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling a variety of motorized window treatments as well as motorized doors, sunroofs, lifts and projection screens.
The C2N-SDC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling a variety of motorized window treatments as well as motorized doors, sunroofs, lifts and projection screens. The C2N-SDC is a Cresnet® device with two independently controlled 120V AC outputs. Each output provides up/down or open/close control of a conventional three-wire bidirectional type motor. Built-in timing and interlock logic make it easy to program the C2N-SDC for failsafe operation.
The C2N-SDC mounts in the wall or ceiling using an off-the-shelf 4" square or 2-gang electrical box. Pushbuttons on the front of the unit allow for manual operation of the motors during installation and setup.
| Load Ratings |
| | Motor Control Channels | 2 |
| | Per Channel | 7.5 Amps, 1/3 HP |
| | Total | 15 Amps |
| | Load Types | 3-Wire 120V AC bidirectional motors |
| Power Requirements |
| | Line Power | 120 Volts AC, 50-60Hz, single-phase |
| | Cresnet Power Usage | 3 Watts (0.125 Amps @ 24 Volts DC) |
| Connections (rear) |
| | Hot | (1) Class 1 flying lead, 14 AWG, black, line power input |
| | Neutral | (1) Class 1 flying lead, 14 AWG, white, neutral |
| | Ground | (1) Class 1 flying lead, 14 AWG, green, ground |
| | Load 1 - 2 | (2) 4-pin terminal blocks comprising (2) independent 120V AC 3-wire bidirectional motor control outputs;
Includes terminals for up/open drive (U), down/close drive (D), common/neutral (C), and ground;
Maximum Wire Size: 14 AWG |
| Connectors (front) |
| | NET | (2) 4-pin 3.5mm detachable terminal blocks;
Cresnet slave ports, paralleled;
Connect to Cresnet control network |
| Buttons |
| | 1 UP/DOWN | (2) buttons for local control of output #1 |
| | 2 UP/DOWN | (2) buttons for local control of output #2 |
| | SETUP | (1) button used for touch-settable ID (TSID) |
| LED Indicators |
| | PWR | (green) Indicates DC power supplied from Cresnet network |
| | NET | (yellow) Indicates communication with the Cresnet system |
| | SETUP | (red) used for touch-settable ID (TSID) |
| Environmental |
| | Temperature | 41° to 122°F (5° to 50°C) |
| | Humidity | 10% to 90% RH (non-condensing) |
| Enclosure |
| | Flat metal plate mountable in a 4-inch square or 2-gang electrical box, 1.5 inch minimum depth; mount 2-gang box horizontally to maintain correct orientation |
| Dimensions |
| | Height | 4.10 in (104.1 mm) |
| | Width | 4.10 in (104.1 mm) |
| | Depth | 1.15 in (29.2 mm) |
| Weight |
| | 0.55 lb (0.25 kg) |
Click
here to search product certificates.
Marketing Resources
University of Central Florida College of Medicine Case Studies
The University of Central Florida College of Medicine is a forward-looking medical school with a culture based on partnerships and collaboration. The new 168,000 square foot, four-story Silver LEED certified medical education building encourages innovation and utilizes cutting-edge technology. Crestron DigitalMedia is distributed throughout the facility, and enables live demonstrations in one location to be viewed by faculty and peers in another classroom on another floor. The Crestron solution helps faculty members use technology to better train tomorrow's health care leaders.
